Blaupunkt BOLOGNA RCR 126 User Manual

Radio / Cassette  
Bologna  
RCR 126  
Operating instructions  
Contents  
Short instructions ........................ 19 Radio operation with RDS ........... 25 Tape operation.............................. 30  
AF - Alternative frequency .................... 25 Inserting a tape ..................................... 30  
Important notes ............................ 22  
Removing a tape ................................... 30  
REG - regional programme ................... 25  
Precautions ........................................... 22  
Traffic safety ......................................... 22  
Installation/Connection.......................... 23  
Selecting a waveband ........................... 26 Fast Forward/Rewind ............................ 30  
Automatic tuning ................................ 26 PROG selector ...................................... 30  
Manual tuning .................................... 26  
DSC programming........................ 31  
Scrolling through the broadcasting  
Anti-theft protection ..................... 23  
Overview of the DSC factory settings ... 32  
network (only FM) ................................. 26  
Changing the memory bank (FM) ......... 26  
Storing stations ..................................... 27  
Automatically storing the strongest  
stations with Travelstore ....................... 27  
Recalling stored stations ....................... 27  
Scanning stored stations  
Release panel ....................................... 23  
Detaching the release panel .............. 23  
Fitting the release panel .................... 23  
Security code ........................................ 23  
Entry of a wrong code number .............. 23  
Switching on security coding................. 24  
Re-start following an interruption of the  
power supply ......................................... 24  
Switching off security coding................. 24  
Optical indication for extra security ....... 24  
Appendix ....................................... 32  
Care notes ............................................ 32  
Release panel .................................... 32  
Mechanism/cassette tapes ................ 32  
Specifications ........................................ 32  
with Preset Scan ................................... 27  
Scanning stations with Radio-Scan ...... 28  
Selecting the seek tuning sensitivity ..... 28  
Switching from stereo to mono (FM) ..... 28  
Receiving traffic programme  
stations with RDS-EON ................ 29  
Traffic announcement priority on/off ..... 29  
Warning beep........................................ 29  
Switching the warning beep off .......... 29  
Automatic seek tuning start................... 29  
Adjusting the volume for traffic  
announcements and the warning beep . 29  
18  
Short instructions  
1 On  
Volume  
Off  
2 LD  
Loudness - When listening at a low  
GEO –  
To adjust the balance (left/right) and  
fader (front/rear) with the rocker switch.  
level, the Loudness function creates a  
more natural sound by boosting the low  
frequency range.  
To switch the Loudness on/off:  
Press LD.  
For more information, read chapter  
“DSC programming”.  
This unit can also be switched on and  
off with the Release Panel B.  
Also, when being connected correctly,  
you may turn the radio on and off via  
the ignition of your car.  
Fader front  
Fader rear  
Balance left  
Balance right  
3 AUD/GEO  
AUD –  
Use one of the following possibilities to  
continue operating the set when the  
ignition is switched off:  
a) Switch on/off with knob 1.  
b) Remove/re-install the release panel.  
c) Press AUD 3.  
When turning on the unit with the re-  
lease panel or by pressing the AUD  
button, the system will start to play with  
the volume adjusted last.  
When operating the unit with the igniti-  
on being switched off, the system will  
automatically shut down after one hour  
in order to avoid that the battery goes  
flat.  
To adjust the treble and bass frequen-  
cies with the rocker switch.  
To alter a setting,  
press AUD or GEO and then chan-  
ge the value with the rocker switch.  
The adjusted value is indicated in the  
display.  
The last setting will be stored automati-  
cally.  
To finish the setting: Press AUD or  
GEO.  
If the setting remains unchanged within  
8 seconds, the display will switch back  
to the previous condition.  
Treble +  
Treble –  
Bass –  
Bass +  
19  
4 DSC (Direct Software Control)  
Use the DSC function to customise  
certain programmable, basic settings to  
suit your personal needs and prefe-  
rences. See chapter “DSC pro-  
7 lo/dx  
To alter the automatic seek tuning sen-  
: Display  
Radio operation:  
sitivity.  
If “lo” is displayed, the radio will only  
pick up strong, local stations (low sensi-  
tivity).  
gramming” for more information.  
NDR1 NDS - Station abbreviation or  
frequency  
If “lo” does not light up, the radio will  
also pick up weaker, distant stations  
(high sensitivity).  
To switch over: Press lo or dx briefly.  
For more information, see chapter  
“DSC programming”.  
5 AF - Alternative frequency during RDS  
operation  
FM  
T
5
- Waveband  
- Memory bank (I, II, T)  
- Preset button (1 - 6)  
- Stereo  
When “AF” lights up in the display, the  
radio will automatically search for a  
frequency offering better reception of  
the same RDS programme.  
lo  
- Seek tuning sensitivity  
- Alternative RDS frequency  
- Traffic programme identifier  
- Priority for traffic programme  
stations  
AF  
TP  
TA  
To switch AF on/off: Press AF briefly.  
8 Cassette removal  
Press  
.
6 REG  
LD  
- Loudness  
REG ON / REG OFF  
9 Cassette loading slot  
Insert tape (side A or 1 up; the open  
side facing to the right).  
With REG ON the system will only  
switch to a better alternative frequency  
if the latter belongs to a linked station  
offering the same regional programme  
(see “REG - regional programme).  
To switch REG on or off: Press REG  
until “REG ON” or “REG OFF” appears  
in the display (BEEP tone).  
Tape operation:  
TR1--PLAY - Side 1 (or 2)  
20  
; PROG button/Fast winding  
> 1, 2, 3, 4, 5, 6 - preset buttons  
You can store six stations on each FM  
memory bank (I, II, T).  
@ M•L  
To select the MW or LW waveband.  
To switch to the other side of the  
cassette tape:  
Press both buttons simultaneously.  
The display shows TR1-PLAY or TR2-PLAY.  
Press button as many times until the  
desired band is adjusted.  
To store a station: Press button during  
radio operation and hold down until the  
radio resumes play.  
To recall a station: Select the wave-  
band and on FM also the desired me-  
mory bank (press FMT button as many  
times as required). Then press the cor-  
responding preset button briefly.  
A FMT - FM, Travelstore  
To switch between the FM memory  
banks I, II and “T” (Travelstore).  
To switch over:  
Press FMT as many times until the  
desired bank is indicated in the display.  
To store the six most powerful stations  
automatically with Travelstore:  
Store: Press FMT; seek tuning starts.  
Recall: Press FMT as many times until  
the display shows “T”. Then briefly  
press one of the preset buttons 1, 2, 3,  
4, 5, or 6.  
Fast winding  
FR : Fast rewind; stop by pressing FF.  
FF : Fast forward; stop by pressing FR.  
Extra function:  
Coding: Read chapter “Anti-theft pro-  
tection” first.  
Buttons 1, 2, 3, 4 - To enter the four-  
digit code.  
Press each of the buttons as many  
times as required until the code number  
given in the car radio passport stands  
in the display.  
< SC  
Radio operation  
Scan (sampling all stations to be recei-  
ved): Press SC briefly.  
= PS  
Preset Scan (sampling all stations  
stored on the preset buttons): Press PS  
briefly.  
? TA (priority for traffic announcements)  
If “TA” is displayed, the system will play  
traffic stations only.  
TA on/off: Press button.  
21  
Important notes  
Precautions  
B RELEASE / CODE-LED  
Release panel - detachable face.  
For extra anti-theft protection, you  
should take the detachable face with  
you when leaving your car.  
To remove it:  
C Rocker switch  
Seek tuning  
Before starting to use your new car radio,  
please read the information on “Traffic safe-  
ty” and “Anti-theft protection” carefully.  
Traffic safety  
Press RELEASE.  
To re-install the panel: Insert on the left  
side first with the cassette slot facing up  
and then press on the right until the  
panel locks in.  
As the driver of a motor vehicle, it is your  
responsibility to pay attention to the traffic  
situationatalltimes.Neveruseyourcarradio  
in a way that could distract you.  
Please keep in mind that you travel a di-  
stance of 14 m per second at a speed of only  
50 km/h.  
Should the traffic situation become particu-  
larlydemanding,weadviseyounottousethe  
radio.  
Always make sure that you are still able to  
hear any warning signals coming from outsi-  
deofthevehicle, suchaspoliceorfireengine  
sirens, so that you can react accordingly.  
Therefore, youshouldalwaysselectamode-  
rate volume for playing your car radio while  
you are driving.  
Up  
Down  
/
/
Up/down in short intervals  
(“AF” must be switched off)  
To scroll through the broadcasting  
network when “AF” is activated  
(e.g. NDR1 ... NDR4).  
Code LED  
May flash for additional theft protection  
when the car radio is switched off, pro-  
vided this feature has been adjusted  
correspondingly via DSC (see DSC  
CODE-LED).  
Extra functions:  
In the DSC mode:  
Select and programme  
DSC functions.  
Enter code and confirm  
Coding:  
with  
.
22  
Anti-theft protection  
Release panel  
Installation/Connection  
Fitting the release panel  
Insert the panel on the left side first with  
the cassette slot facing up and then  
This unit is equipped with a release panel  
(detachable face).  
You can remove the control face at the push  
of a button.  
For extra anti-theft protection, we recom-  
mend you to take the detachable face with  
you when leaving your car.  
Re-inserting the release panel is child’s play.  
Thesetwillbereadyforuseimmediately;you  
will find all the previous settings re-adjusted.  
If you would like to install this equipment  
yourself or add any new components, please  
read the enclosed installation and connec-  
tion instructions carefully.  
Do not connect the loudspeaker outputs to  
ground!  
press on the right until it locks in.  
Theunitisnowreadyforusewiththesettings  
adjusted before removing the panel.  
Use only the accessory and replacement  
parts approved by Blaupunkt.  
Security code  
This car radio is supplied with inactive code  
protection. In order to switch the security  
coding system on, proceed as described in  
the following.  
If the coding system is active while the power  
supply to the system is interrupted (e.g. theft,  
disconnection of the car battery), the set will  
be electronically blocked. In such a case it  
canonlybemadeoperableagainbyentering  
the correct code number given in the car  
radio passport.  
Detaching the release panel  
Press RELEASE.  
The unit will be switched off automatically.  
The control panel will be released in order for  
you to detach it.  
Store it in a safe place, excluding possible  
damages.  
Entry of a wrong code number  
It should not be possible for a thief to find out  
the correct code number by trial and error.  
Thisiswhythesetwillbeblockedforacertain  
periodoftimeafterawrongcodenumberhas  
been entered. The display will then show  
“CODE ERR”.  
After the first three unsuccessful attempts,  
the system will lock for 8 seconds; after  
23  
further attempts, the waiting time extends to Now the security coding system is active.  
If the display shows “CODE ERR”, you have  
one hour. The display will briefly show “CODE” each entered a wrong code. Re-enter the correct  
After 20 unsuccessful attempts, the display time the set is turned on.  
willshowSERVICE”. Inthiscaseyoucanno  
longer re-start the unit.  
code after the waiting time (“CODE” will ap-  
pear in the display).  
If you switch off the set while it is blocked, the  
waiting time will start anew as soon as the  
radio is turned on again.  
Re-start following an interrup-  
tion of the power supply  
Notice:  
(coding system is activated)  
Keep your car radio passport with the code  
number in a safe place in order to avoid  
“unauthorised access” to your car radio.  
When the security code system is activated,  
the unique code must be entered each time  
the power to the unit was interrupted.  
The radio will function again as soon as you  
have entered the correct code.  
If you have lost your radio passport and  
forgotten the code number, your radio can  
only be made operable again by one of our  
authorised service workshops (subject to  
payment).  
Turn on the radio.  
The display shows “CODE”.  
Switching off security coding  
Turn off the radio.  
Briefly press preset button 1; the dis-  
play shows “0000”.  
Press preset buttons 1 and 4 simulta-  
neously and hold down while switching  
the set on again.  
Enter the code number given in the  
Blaupunkt car radio passport:  
The display shows “CODE”.  
Example: The code number is 2521.  
- Press preset button 1 twice; the dis-  
play shows “2000”.  
- Press preset button 2 five times; the  
display shows “2500”.  
- Press preset button 3 twice; the dis-  
play shows “2520”.  
- Press preset button 4 once; the dis-  
play shows “2521”.  
Now enter the code number to be found  
in the car radio passport and confirm  
(see example under “Re-start ...”).  
Security coding is now switched off.  
Optical indication for extra  
security  
Switching on security coding  
To activate the coding system:  
To indicate that your unit is equipped with  
security coding, you may let an LED installed  
in the non-detachable part of the front panel  
flash for extra security when the car is statio-  
nary.  
To confirm the code number:  
Press the upper part of the rocker  
Turn off the radio.  
Press preset buttons 1 and 4 simulta-  
neously and hold down while switching  
the set on again.  
switch  
.
If you have entered the correct code, the unit  
will now be ready for use.  
The display briefly shows “CODE” and the  
unit will switch on.  
For this, the following requirements must be  
fulfilled:  
Release preset buttons 1 and 4.  
24  
Radio operation with RDS (Radio Data System)  
Permanent 12 V supply and the + ignition The Radio Data System offers you more switching on the radio or recalling one of the  
lead must be connected correctly (as illustra- convenience when listening to FM radio sta- stored frequencies, the unit is automatically  
tions.  
„LED 1“ must be adjusted in the DSC mode. More and more radio stations have begun to “SEARCH” will disappear from the display  
broadcast RDS information alongside their when the alternative frequency has been  
searching for an alternative frequency.  
ted in the installations instructions).  
Read “DSC programming - CODE-LED”.  
programmes.  
Assoonasaprogrammehasbeenidentified,  
found or after the frequency band has been  
run through completely.  
the station name including a regional identi- If the reception quality of the selected pro-  
fier, if applicable, will appear in the display, gramme becomes too bad:  
for example, NDR1 NDS (regional program-  
me in Lower Saxony, Germany).  
Tune into another station.  
When RDS is activated, the station buttons  
become programme buttons. You now know  
exactly which programme you have tuned  
into, making it easy to find the desired station  
quickly.  
REG - regional programme  
Certain radio programmes are split up at  
times into regional programmes offering lo-  
cal information. The 1st programme broad-  
cast by NDR, for example, offers program-  
mes with different contents in the northern  
statesofGermanySchleswig-Holstein,Ham-  
burg and Lower Saxony at certain times of  
the day. If you are listening to one program-  
me and move to an area where another  
linked regional programme becomes stron-  
ger, the unit will switch to that programme.  
If you wish to continue listening to the first  
programme,  
But RDS offers you further advantages:  
AF - Alternative frequency  
The AF (Alternative Frequency) function  
makes sure that the strongest frequency of  
the currently selected programme is always  
tuned in automatically.  
This function is activated when “AF” appears  
in the display.  
In order to switch this function on or off,  
press the REG button.  
press the AF button briefly.  
“REG ON” appears in the display.  
While searching for the strongest reception  
signal, the radio may switch to mute briefly.  
If “SEARCH” appears in the display when  
If you leave the service area of the regional  
programme tuned into, or if you would like to  
25  
takeadvantageofthefullRDSservice,switch Automatic tuning  
to “REG OFF”.  
>>, or backwards using the << button, e.g.  
NDR 1, 2, 3, 4, N-JOY (North German broad-  
caster).  
Press the REG button briefly.  
For this it is necessary that the stations have  
beenreceivedatleastonceandthatAFhas  
been activated before (lights up in the dis-  
play).  
For this purpose, you may start Travelstore  
seek operation:  
When active, “REG ON” will be briefly dis-  
played each time the radio is switched on.  
Up  
Down  
Selecting a waveband  
With this car radio you can select between  
the following wavebands:  
FM 87.5 - 108 MHz  
MW 531 - 1602 kHz  
LW 153 - 279 kHz  
/
/
Up/down in short intervals  
(“AF” must be switched off)  
To scroll through the broadcasting  
network when “AF” is activated  
(e.g. NDR1 ... NDR4).  
Press FMT for 2 seconds; the system  
starts to run through the frequency  
band.  
If “AF” does not light up,  
press AF.  
Select the desired waveband by pres-  
sing the FMT or M•L button.  
Manual tuning << >>  
(prerequisite: AF is switched off!)  
With this, the requirements for selecting sta-  
tions with << >> are fulfilled.  
To switch between MW and LW:  
Press M•L.  
Press << >>; the frequency will change  
in short intervals in downwards or up-  
wards direction.  
Changing the memory bank (FM)  
Automatic tuning  
Press / ; the car radio will automati-  
cally search for the next station.  
Whenkeepingtheupperorlowerpart  
/
You can shift between the memory banks I, II  
and T in order to store stations and recall  
them later.  
The currently selected memory bank is indi-  
cated in the display.  
When holding the right or left part of the  
rocker switch pressed down, the frequency  
scan is speeded up.  
/
of  
the rocker switch depressed, seek tuning will  
speed up in upwards or downwards direc-  
tion.  
Scrolling through the broad-  
casting network (only FM)  
Press the FMT button as many times  
until the desired memory bank lights up  
in the display.  
You can use the << >> buttons to tune in  
stations of your reception area.  
If several programmes of one broadcasting  
network can be received, you can scroll  
through them in forwards direction pressing  
26  
Storing stations  
Automatically storing the stron- Scanning stored stations  
gest stations with Travelstore with Preset Scan  
On FM, you can store six stations on the  
preset buttons 1 to 6 for each of the memory You can automatically store the six most Youcanhaveallofthestoredstationsplayed  
banks I, II and T.  
On MW/LW, you can store six stations each.  
powerful FM stations of your current recepti- briefly on all wavebands.  
on area sorted according to their signal  
strength. This function is particularly conve- Travelstore memory bank or of the two other  
nient on longer trips. storage levels.  
On FM, you can scan the stations of the  
Select the waveband with FMT or M•L  
and on FM also the desired memory  
bank (with FMT).  
Press the FMT button for more than  
2 seconds.  
Select the waveband.  
Tune in a station with the rocker switch  
(either automatically or manually).  
On FM, choose Travelstore or another  
The radio will search for the strongest FM  
stations and store them on the memory bank  
T (Travelstore). When this process has been  
completed, the radio will play the first station.  
If desired, stations can also be stored manu-  
ally on the Travelstore bank (see “Storing  
stations”).  
memory bank using the FMT button.  
To start Preset Scan:  
Press PS.  
Press the desired preset button until  
the radio resumes play after the muting  
(takes approximately 2 seconds, confir-  
med by beep).  
The stations will be played for approximately  
8 seconds each.  
Now the station has been stored.  
Theactivatedpresetbuttonisindicatedinthe  
display.  
The positions blinking in the display show  
you the memory bank and preset position of  
the currently scanned station.  
Recalling stored stations  
To select a station currently being  
scanned and switch off Preset Scan:  
Notice:  
You can recall any stored station at the touch  
of a button.  
Should you tune in a station which has alrea-  
dy been stored before, the corresponding  
presetbuttonandthememorybankwillbriefly  
flash in the display if you have selected  
another memory bank.  
Press PS briefly.  
Select the waveband by pressing FMT  
or M•L. On FM, also choose the corre-  
sponding memory bank by pressing the  
FMT button as many times until the  
desired bank appears in the display.  
Press the corresponding preset button  
briefly to recall the station.  
27  
Scanning stations with  
Radio-Scan  
Selecting the seek tuning sensi-  
tivity  
You can alter the automatic seek tuning  
Beginning with the station currently tuned in,  
you can scan the waveband. The radio will sensitivity.  
play each station for 8 seconds.  
If “lo” is displayed, the radio will only pick up  
To start the scan:  
strong, local stations (low sensitivity).  
If “lo” does not light up, the radio will also pick  
up weaker, distant stations (high sensitivity).  
To switch over,  
Press SC briefly.  
The scanned frequency or the station  
name will start flashing in the display.  
During the actual scanning process  
“SCAN” will be displayed.  
Press lo or dx.  
On top of this, the sensitivity levels can be  
adjusted separately for lo and dx (see chap-  
ter “DSC programming”).  
To select a station currently being scan-  
ned and switch off the scan function:  
Press SC briefly.  
If no station is selected, the scan function will  
be automatically switched off after the fre-  
quency band has been run through comple-  
tely. The unit will tune in the station listened  
to before starting the scan.  
Switching from stereo to mono  
(FM)  
If reception is poor, you may get better sound  
quality by switching to mono:  
Press the lo button for approximately 2  
seconds.  
With mono playback, the stereo sign  
will disappear from the display.  
Each time the radio is switched on, stereo  
playback is activated.  
The unit will automatically switch to mono if  
the received signal is not strong enough for  
stereo playback.  
28  
Receiving traffic programme stations with RDS-EON  
Many FM broadcasters offer traffic messa- Traffic announcement priority  
Alternatively:  
ges for their service area at regular intervals. on/off  
b) Switch off the priority for traffic an-  
nouncements:  
All traffic programme stations transmit a spe-  
If the priority for traffic announcement pro-  
cial carrier signal alongside their program-  
grammes is activated, “TA” will light up in the  
mes, which is decoded by your car radio. If  
display.  
Press TA.  
“TA” will disappear from the display.  
this signal is identified, “TP” will appear in the  
To switch the priority on or off:  
display (Traffic Programme).  
Press the TA button.  
Automatic seek tuning start  
(tape operation)  
In addition to these, there are also stations  
which do not actually transmit traffic pro-  
grammes themselves, but by using RDS-  
EON they offer the possibility to receive the  
traffic messages broadcast by another traffic  
programme station in the same radio net-  
work. If you listen to one of these stations  
(e.g. NDR3), “TP” will appear in the display  
provided the priority for traffic programme  
stationshasbeenactivated, i.e. “TAmustbe  
displayed.  
If a traffic announcement is broadcast, the  
radio will automatically switch to the linked  
trafficprogrammestation(inthiscase,NDR2)  
for the duration of the message and return to  
the original programme (NDR3) afterwards.  
When pressing TA while a message is being  
broadcast, this message will be interrupted.  
The unit will then switch back to the previous  
condition. The priority for other traffic messa-  
ges remains active.  
When leaving the reception area of the tuned  
in traffic programme station while listening to  
a tape, the system will automatically start  
searching for a new TA programme.  
If no such station is found within approxima-  
tely 30 seconds, tape operation will be stop-  
ped and a warning beep will sound.  
To switch the warning beep off, proceed as  
described above.  
Warning beep  
If you leave the reception area of the traffic  
programme station currently tuned into, you  
will hear a warning beep after approximately  
30 seconds.  
This alarm tone will also be released when  
pressing a preset button which has no traffic  
programme allocated to it.  
Adjusting the volume for traffic  
announcements and the warning  
beep  
This volume was preset at the factory.  
YoucanalterthevalueusingtheDSCfunction  
(see “DSC programming, TA”).  
Switching the warning beep off  
a) Tune into another station offering traffic  
information:  
Press the rocker switch or  
a preset button which has a traffic  
programme station allocated to it.  
29  
Tape operation  
Inserting a tape  
Fast Forward/Rewind  
PROG selector  
(To change the tape direction during  
cassette playback)  
Fast Forward  
Turn on the set.  
Insert a tape.  
Press FF.  
Press FR and FF simultaneously.  
At the end of a tape side, the mecha-  
nism changes directions automatically  
to play the other side.  
At the end of a tape side, the mechanism  
changes directions automatically to play the  
other side (Autoreverse). The display shows  
“TR1-PLAY” for track (side) 1 or A or “TR2-  
PLAY” for track 2 or B.  
Insert the tape with side A or 1 showing up, the  
open side facing to the right.  
Stopping Fast Forward operation  
Press FR.  
Fast Rewind  
= Press to eject the tape.  
Notice:  
Press FR.  
Ifthereistoomuchtensiononthetapeduring  
playback, the set may switch over by itself  
before having reached the end of the tape  
side. In this case check the condition of the  
cassette tape. Sometimes it helps to rewind  
it completely.  
At the beginning of the tape, the me-  
chanism will automatically start play-  
back.  
The tape will be played in the direction used  
last.  
“TR1-PLAY” in the display means that track  
1 or A is being played.  
Stopping Fast Rewind operation  
Press FF.  
Removing a tape  
To switch to the other side of the  
cassette tape:  
Press  
.
The cassette will eject.  
Press both buttons simultaneously.  
The display shows TR1-PLAY or TR2-PLAY.  
Fast winding  
FR : Fast rewind; stop by pressing FF.  
FF : Fast forward; stop by pressing FR.  
30  
DSC programming  
DSC (Direct Software Control) allows you to  
customise certain programmable, basic set-  
tings to suit your personal needs and prefe-  
rences and then store them.  
The basic settings for this audio equipment  
weremadeatthefactory. Inthefollowingyou  
canfindanoverviewofthesesettings,sothat  
you can always reset to these if desired.  
If you wish to alter any of the programming,  
BEEP  
Confirmation tone for all  
functions which require a  
button to be pressed for  
more than 2 seconds.  
The volume can be adju-  
sted from between 0 to 9.  
(0 = off)  
Each alteration of this va-  
lue is confirmed by a beep  
tone of the corresponding  
volume.  
RM  
(Radio Monitor)  
With RM-ON, the unit will  
automatically switch to the  
tuner whenever the casset-  
te is fast winding.  
RM-OFF - The function is  
switched off.  
LOCAL  
(lo)  
press DSC.  
To adjust the seek tuning  
sensitivity for local recepti-  
on.  
The display will show you the adjusted con-  
dition.  
Usetherockerswitchtoselectandadjustthe  
functions described in the following.  
LED (code)  
You can adjust the LED B  
to flash for extra anti-theft  
protection.  
LOCAL 1 - high sensitivity  
LOCAL 3 - low sensitivity  
LED 1 - LED always flash-  
es when the unit  
has been swit-  
DIS  
(dx)  
To adjust the seek tuning  
sensitivity for distant recep-  
tion.  
ched off via the  
ignition.  
DIS. 1- high sensitivity  
DIS. 3- low sensitivity  
/
Select function  
Adjust value –  
Adjust value +  
LED 0 - No flashing.  
LOUD  
Loudness - When listening  
at a low level, the Loud-  
ness function creates a  
more natural sound by  
boosting the low frequency  
range.  
To quit the DSC programming mode and  
store the adjustment:  
TA VOL  
To adjust the traffic an-  
nouncement volume from  
between 1 to 9. The mes-  
sage will then come  
through at this volume.  
(1 = low)  
Press DSC.  
If the setting remains unchanged within 8  
seconds, the system will automatically store  
the last adjustment. The display will switch  
back to the previous condition.  
LOUD 1 - Low boost  
LOUD 6 - Max. boost  
31  
Appendix  
Overview of the DSC factory  
settings  
Care notes  
Specifications  
Release panel  
Amplifier  
To ensure that the unit functions properly it is  
important that the contacts between the re-  
lease panel and the head unit are free from  
any foreign particles.  
If necessary, clean the contacts using a cot-  
ton swab soaked with alcohol.  
Output power:  
4 x 20 W RMS power  
acc. to DIN 45324  
(14.4V),  
TA VOL  
BEEP  
LED (Code) : 1  
LOUD  
RM  
LOCAL  
: 4  
: 3  
4 x 30 W max. power  
: 4  
: OFF  
: 1  
Tuner  
Wavebands  
DIS  
: 1  
Mechanism/cassette tapes  
FM  
MW  
LW  
:
:
:
87.5 – 108 MHz  
531 – 1602 kHz  
153 – 279 kHz  
To avoid possible problems, you should not  
use cassette tapes longer than 60 or 90  
minutes (C60/C90). Store your tapes in a  
cool place away from dirt, dust and tempera-  
turesexceeding50° Celsius. Allowverycold  
tapes to warm up before playing them in  
order to avoid uneven tape transport. After  
approximately 100 hours of use, dust partic-  
les collected on the playback head or roller  
may lead to tape run problems and sound  
distortions.  
Use a head cleaning tape to remove normal  
dirt build-up. For tougher cases, use a cotton  
swab (Q-Tip) soaked with alcohol. Do not  
attempt to clean by inserting a hard object  
into the player!  
FM sensitivity:  
1.0 µV at 26 dB  
signal-to-noise ratio  
FM frequency  
response:  
35 - 16 000 Hz  
35 - 16 000 Hz  
Tape player  
Frequency  
response:  
Subject to modifications!  
32  
Blaupunkt-Werke GmbH  
Bosch Gruppe  
5/96  
K7/VKD 8 622 400 771  

Briggs Stratton AA0101 User Manual
Canon Camcorder PC900S User Manual
Canon MV6I User Manual
Classen STAND AER SA 25 User Manual
Creative Divi Cam 316 User Manual
Eclipse Fujitsu Ten CD5100 User Manual
Farenheit Technologies H 88GR User Manual
FOCUS Enhancements MANL 0823 01 User Manual
Iiyama PROLITE H2010 User Manual
JVC Car Stereo System KD R331 User Manual