Blaupunkt Car Stereo System 320 User Manual

Car Radio CD USB SD Bluetooth  
|
|
|
|
Toronto 420 BT  
1 011 202 420 / 1 011 202 421  
1 011 202 320 / 1 011 202 321  
San Francisco 320  
Operating and installation instructions  
Contents  
Safety notes ...................................................... 4  
Symbols used.............................................................. 4  
Road safety .................................................................. 4  
General safety notes................................................. 4  
Declaration of conformity ...................................... 5  
Scanning all tracks ..................................................12  
Playing tracks in random order ..........................13  
Repeatedly playing individual tracks or  
directories ..................................................................13  
Configuring the display.........................................13  
Browse mode ............................................................14  
Searching by track names  
(not in iPod mode) ..................................................15  
Cleaning notes.................................................. 5  
Disposal notes................................................... 5  
Scope of delivery .............................................. 5  
Optional equipment  
(not part of the scope of delivery)....................... 5  
Bluetooth®  
(Toronto 420 BT only)..................................... 15  
Bluetooth® menu.....................................................15  
Pairing and connecting a device .......................16  
Telephone functions...............................................17  
Bluetooth® streaming mode................................20  
Phone book functions ...........................................20  
Placing the device in operation....................... 5  
Attaching/detaching the control panel ............ 5  
Display language (only Toronto 420 BT)........... 6  
Setting the reception area ..................................... 6  
Switching on/off ........................................................ 6  
Volume .......................................................................... 6  
Display brightness..................................................... 7  
Switching demo mode on/off............................... 7  
Additional functions in  
the Bluetooth® menu.............................................21  
External audio sources................................... 23  
Front AUX-IN socket................................................23  
Traffic information............................................ 7  
Sound settings................................................ 23  
Calling and exiting the "AUDIO" menu............23  
Making settings in the "AUDIO" menu.............24  
Setting the 3-band equaliser...............................25  
Radio mode....................................................... 7  
RDS.................................................................................. 7  
Changing to radio mode or selecting  
a memory bank .......................................................... 8  
User settings ................................................... 26  
Tuning into a station ................................................ 8  
Storing stations or calling stored stations........ 8  
Scanning stations...................................................... 8  
Storing stations automatically (Travelstore).... 9  
PTY.................................................................................. 9  
Configuring the display.........................................10  
Calling the user menu and selecting  
a menu.........................................................................26  
Making settings in the "TUNER" menu ............27  
Making settings in the "DISPLAY" menu.........28  
Making settings in the "VOLUME" menu ........29  
Making settings in the "CLOCK" menu ............30  
Making settings in the "VARIOUS" menu........30  
CD/MP3/WMA/iPod mode.............................. 10  
Basic information.....................................................10  
Changing to CD/MP3/WMA/iPod mode.........11  
Inserting/ejecting a CD .........................................11  
Connecting/removing a USB data carrier.......11  
Inserting/removing the memory card.............12  
Selecting tracks........................................................12  
Fast searching...........................................................12  
Interrupting playback ............................................12  
Factory settings .............................................. 31  
Useful information ......................................... 32  
Warranty .....................................................................32  
Service .........................................................................32  
Technical data ................................................. 32  
Installation instructions ................................ 33  
3
Safety notes  
Road safety  
Safety notes  
Observe the following notes about road safety:  
The car sound system was manufactured accord-  
ing to the state of the art and established safety  
guidelines. Even so, dangers may occur if you do  
not observe the safety notes in these instructions.  
Use your device in such a way that you can  
always safely control your vehicle. In case of  
doubt, stop at a suitable location and operate  
your device while the vehicle is standing.  
These instructions contain important informa-  
tion to easily and safely install and operate the car  
sound system.  
Remove or attach the control panel only  
while the vehicle is standing.  
Always listen at a moderate volume to pro-  
tect your hearing and to be able to hear acous-  
tic warning signals (e.g. police sirens). During  
mute phases (e.g. when changing the audio  
source), changing the volume is not audible.  
Do not increase the volume during this mute  
phase.  
Read these instructions carefully and com-  
pletely before using the car sound system.  
Keep the instructions at a location so that they  
are always accessible to all users.  
Always pass on the car sound system to third  
parties together with these instructions.  
In addition, observe the instructions of the devices  
used in conjunction with this car sound system.  
General safety notes  
Observe the following notes to protect yourself  
against injuries:  
Symbols used  
These instructions employ the following symbols:  
Do not modify or open the device. The device  
contains a Class 1 laser that can cause injuries  
to your eyes.  
Do not increase the volume during mute  
phases, e.g. when changing the audio source.  
Changing the volume is not audible during a  
mute phase. Do not increase the volume dur-  
ing mute phases, e.g. when changing the audio  
source.  
DANGER!  
Warns about injuries  
CAUTION!  
Warns about damaging the CD drive  
DANGER!  
Warns about high volume  
Use as directed  
This car sound system is intended for installation  
and operation in a vehicle with 12 V vehicle sys-  
tem voltage and must be installed in a DIN slot.  
Observe the performance limits in the technical  
data. Repairs and installation, if necessary, should  
be performed by a specialist.  
The CE mark confirms the compliance  
with EU directives.  
u
Identifies a sequencing step  
Identifies a listing  
Installation instructions  
You may only install the car sound system your-  
self if you are experienced in installing car sound  
systems and are very familiar with the electrical  
system of the vehicle. For this purpose, observe  
the installation instructions at the end of these  
instructions.  
4
Safety notes | Cleaning notes | Disposal notes | Scope of delivery | Placing the device in operation  
Declaration of conformity  
Optional equipment  
(not part of the scope of delivery)  
The Blaupunkt AudioVision GmbH & Co. KG de-  
clares that the car sound system San Francisco  
320 complies with the basic requirements and  
the other relevant regulations of the directive  
2004/108/EEC and the car sound system Toronto  
420 BT complies with the basic requirements and  
the other relevant regulations of the directive  
1999/5/EC.  
Use only accessories approved by Blaupunkt.  
Information is available from your Blaupunkt  
specialised dealer or on the Internet under  
Placing the device in operation  
The declaration of conformity can be found on the  
Caution!  
Transport securing screws  
Before the startup of the car sound system, ensure  
that the transport securing screws are removed  
(see the chapter "Installation instructions").  
Cleaning notes  
Solvents, cleaning and scouring agents as well as  
dashboard spray and plastics care product may  
contain ingredients that will damage the surface  
of the car sound system.  
Attaching/detaching the control  
panel  
Use only a dry or slightly moistened cloth for  
cleaning the car sound system.  
The car sound system is equipped with a detach-  
able control panel (release panel) to protect your  
equipment against theft. In the delivery state, the  
control panel is in the supplied case. To start oper-  
ating the radio after installation, you must first at-  
tach the control panel (see the section "Attaching  
the control panel" in this chapter).  
If necessary, clean the contacts of the control  
panel regularly using a soft cloth moistened  
with cleaning alcohol.  
Disposal notes  
Do not dispose of your old unit in the house-  
Always take the control panel with you when leav-  
ing the vehicle. The car sound system is worthless  
to a thief without this control panel.  
hold trash!  
Use the return and collection systems available to  
dispose of the old device.  
Caution  
Scope of delivery  
Damage to the control panel  
Never drop the control panel.  
The scope of delivery includes:  
1
1
1
1
1
Car sound system  
Transport the control panel so that it is protected  
against impacts and the contacts cannot become  
dirty.  
Operating/installation instructions  
Case for the control panel  
Support frame  
Do not expose the control panel to direct sunlight  
or another heat source.  
Antenna connection adapter  
Avoid direct skin contact with the control panel's  
electrical contacts.  
Extended scope of delivery  
(for 1 011 202 321 / 1 011 202 421 only):  
1
1
1
Handheld remote control (incl. battery)  
Connecting cable chamber A  
Connecting cable chamber B  
5
Placing the device in operation  
Attaching the control panel  
Switching on/off  
u
Push the control panel into the bracket at the  
right edge of the device.  
Switching on/off with the On/Off button  
u
For switch-on, press the On/Off button  
3.  
u
Push the control panel carefully into the left  
bracket until it clicks into place.  
The car sound system switches on.  
u
To switch off the device, press and hold down  
the On/Off button  
onds.  
Removing the control panel  
3
for longer than 2 sec-  
u
Press the  
panel.  
button  
1
to unlock the control  
The car sound system switches off.  
The left side of the control panel detaches  
from the device and is secured by the bracket  
against falling out.  
Note:  
If you switch on the car sound system while  
the vehicle ignition is switched off, it auto-  
matically switches off after 1 hour to preserve  
the vehicle battery.  
u
u
Move the control panel slightly to the left until  
it disengages from the right bracket.  
Carefully remove the control panel from the  
left bracket.  
Switching on/off via vehicle ignition  
The car sound system will switch off/on simulta-  
neously with the ignition if the device is correctly  
connected to the vehicle's ignition as shown in the  
installation instructions and you did not switch  
Note:  
The car sound system automatically switches  
off as soon as the control panel is removed.  
the device off by pressing the On/Off button  
3.  
Display language  
(only Toronto 420 BT)  
For the Toronto 420 BT, you can define whether the  
language for messages on the display is English or  
German. The setting is performed in the user menu  
(see the chapter "User settings", section "Mak-  
ing settings in the "DISPLAY" menu", menu item  
"LANGUAGE").  
Volume  
Adjusting the volume  
You can adjust the volume in steps from 0 (o) to  
50 (maximum).  
u
Turn the volume control  
volume.  
4
to change the  
Note:  
Setting the reception area  
If a telephone or navigation system is con-  
nected with the car sound system as de-  
scribed in the installation instructions (pin  
2 of chamber A), the car sound system is  
muted in case of a telephone call or naviga-  
tion announcement so that you can hear the  
playback of the telephone or navigation sys-  
tem undisturbed. During muting, the display  
shows "TELEPHONE".  
This car sound system is designed for operation in  
different regions with different frequency ranges  
and station technologies. The factory default of  
the reception area is "EUROPE". In addition, the  
reception areas "USA", "SOUTH AMERICA" and  
"THAILAND" are available.  
Note:  
If you operate the car sound system outside of  
Europe, you may first have to set a suitable re-  
ception area in the user menu (see the chapter  
"User settings", section "Making settings in the  
"TUNER" menu", menu item "TUNER AREA").  
Muting the car sound system (Mute)  
Briefly press the On/Off button  
u
3
to mute  
the car sound system or to reactivate the pre-  
vious volume.  
While it is muted, the display shows "MUTE".  
6
Placing the device in operation | Traffic information | Radio mode  
for traffic announcements (see the chapter  
"User settings", section "Making settings in  
the "VOLUME" menu", menu item "TRAFFIC  
VOL").  
Display brightness  
You can manually switch the display brightness  
between daytime mode and night-time mode or  
switch automatically with the driving lights of the  
vehicle.  
To cancel a switched-through traffic an-  
nouncement, press the SRC button  
@.  
Note:  
The manual or automatic switching of the  
display brightness is selected in the user  
menu (see the chapter "User settings",  
section "Making settings in the "DISPLAY"  
menu", menu item "DIMMER").  
Radio mode  
RDS  
Many FM stations broadcast an RDS (Radio Data  
System) signal in addition to their programme in  
the reception area "EUROPE" that allows the follow-  
ing additional functions:  
u
Press the DIS button  
A
for approx. 2 seconds  
to start scanning.  
The station name is shown on the display.  
Switching demo mode on/off  
The car sound system recognises traffic an-  
nouncements and news broadcasts and can  
automatically switch them through in other  
operating modes (e.g. in CD mode).  
Alternate frequency: If RDS is activated, the car  
sound system automatically selects the best  
receivable frequency for the station that is cur-  
rently set.  
Regional: At certain times, some radio stations  
divide their programme into regional pro-  
grammes providing different content. If the  
REGIONAL function is activated, the car sound  
system changes only to those alternate frequen-  
cies on which the same regional programme is  
being broadcast.  
The demo mode shows the functions of the car  
sound system as scrolling text on the display. By  
pressing any button, the demo mode is interrupt-  
ed and you can operate the device.  
The demo mode can be switched on and off in the  
user menu (see the chapter "User settings", section  
"Making settings in the "VARIOUS" menu", menu  
item "DEMO MODE").  
Traffic information  
In the reception area "EUROPE", an FM station can  
identify traffic reports by means of an RDS signal.  
If priority for traffic reports is switched on, a traf-  
fic report is automatically switched through, even  
if the car sound system is currently not in radio  
mode.  
The functions RDS and REGIONAL are activated  
and deactivated in the user menu (see the chap-  
ter "User settings", section "Making settings  
in the "TUNER" menu", menu items "RDS" and  
"REGIONAL").  
If priority is switched on, the display shows the  
traffic jam symbol (  
). "TRAFFIC" is displayed  
during a switched-through traffic announcement.  
The priority is activated and deactivated in the  
user menu (see the chapter "User settings", sec-  
tion "Making settings in the "TUNER" menu", menu  
item "TRAFFICINFO").  
Note:  
If you adjust a different reception area than  
"EUROPE", RDS is automatically switched off.  
The station name continues to be shown on  
the display. If you want to use radio stations  
with RDS features in your region, switch on  
RDS in the user menu.  
Notes:  
The volume is increased for the duration  
of the switched-through traffic announce-  
ment. You can adjust the minimum volume  
7
Radio mode  
Tuning into stations manually  
Changing to radio mode or selecting  
a memory bank  
The following memory banks are available in the  
different reception areas:  
u
Press the rotary button  
manual station tuning.  
7
once to activate  
The display briefly shows "SEARCH MANUAL".  
u
Turn the rotary control  
quency in increments.  
7
to change the fre-  
Region  
Memory banks  
EUROPE  
USA  
SOUTH AMERICA  
THAILAND  
FM1, FM2, FMT, MW, LW  
FM1, FM2, FMT, AM, AMT  
FM1, FM2, FMT, AM, AMT  
FM1, FM2, FMT, AM, AMT  
Note:  
The manual station tuning is automatically  
exited approx. 15 seconds after the last fre-  
quency change, and the station seek tuning is  
started by turning the rotary control  
7.  
u
Press the SRC button  
desired memory bank is displayed.  
@
repeatedly until the  
Storing stations or calling stored  
stations  
u
u
u
Notes:  
Up to 5 stations can be stored in each  
memory bank.  
Select the desired memory bank.  
If necessary, set the desired station.  
You can disable certain memory banks  
that you do not want to use (see chapter  
"User settings", section "Making settings  
in the "TUNER" menu", menu item "BAND  
SELECTION"). Deactivated memory banks  
are skipped during the source selection  
Press the station button 1 - 5  
>
for approx.  
2 seconds to store the current station under  
the button.  
- or -  
u
Briefly press the station button 1 - 5  
up the stored station.  
>
to call  
with the SRC button  
@.  
Tuning into a station  
Scanning stations  
With the scan function, you can scan either every  
receivable station or every stored station of the  
current waveband.  
There are various ways of tuning into a station:  
Starting station seek tuning  
u
Turn rotary control  
clockwise or clockwise to start station seek  
tuning.  
7
one notch counter-  
Note:  
You can adjust the scan time for each station  
(see the chapter "User settings", section "Mak-  
ing settings in the "VARIOUS" menu", menu  
item "SCAN TIME").  
The display briefly shows "SEARCH AUTO".  
The radio tunes into the next receivable sta-  
tion.  
Scanning all receivable stations of the  
waveband  
Notes:  
For the reception area "EUROPE": In the FM  
waveband, only traffic information stations  
are tuned into if the priority for traffic infor-  
u
Press the MENU button  
onds to start scanning.  
2
for approx. 2 sec-  
mation (  
) is switched on.  
During the scan, the display alternately dis-  
plays "SCAN" and the current frequency as  
well as memory bank or station name.  
The sensitivity of seek tuning can be ad-  
justed (see the chapter "User settings",  
section "Making settings in the "TUNER"  
menu", menu item "SENSITIVITY").  
u
Briefly press the MENU button  
2
to con-  
tinue listening to the station that is currently  
being scanned.  
8
Radio mode  
Scanning all stored stations of the waveband  
PTY  
u
Press the rotary control  
7
for approx. 2 sec-  
In the reception areas "EUROPE" and "USA", an FM  
station can transmit its current programme type,  
e.g. CULTURE, POP, JAZZ, ROCK, SPORT or SCIENCE.  
Hence, the PTY function allows a targeted search  
for broadcasts of a certain programme type, e.g.  
for rock or sports broadcasts. Note that PTY is not  
supported by all stations.  
onds to start the scanning.  
During the scan, the display alternately dis-  
plays the current frequency as well as memo-  
ry bank and location or station name.  
u
Briefly press the rotary control  
7
to continue  
listening to the station that is currently being  
scanned.  
Note:  
The PTY function is only available if it has been  
activated (see the chapter "User settings", sec-  
tion "Making settings in the "TUNER" menu",  
menu item "PTY").  
Storing stations automatically  
(Travelstore)  
With Travelstore, you can automatically search for  
and store the 5 FM stations offering the strongest  
reception in the region in one memory bank. Any  
previously stored stations in this memory bank are  
deleted in the process.  
Selecting a programme type  
To select a programme type. read the section  
"Making settings in the "TUNER" menu", menu  
item "PTY TYPES" in the chapter "User settings".  
With Travelstore, you can store 5 FM stations in  
the FMT memory bank in all reception areas. In  
the reception areas "USA", "SOUTH AMERICA" and  
"THAILAND", you can also store 5 AM stations in  
the AMT memory bank.  
Note:  
In the reception area "EUROPE", you can adjust  
the language in which the programme types  
are displayed (see the chapter "User settings",  
section "Making settings in the "TUNER"  
menu", menu item "PTY LANGUAGE").  
u
Select a memory bank of the desired wave-  
band, e.g. FM1 or AM.  
Searching for stations  
Prerequisite: PTY function is switched on.  
u
Press the SRC button  
onds.  
@
for approx. 2 sec-  
u
u
Press the rotary control  
The display briefly shows "SEARCH PTY".  
Turn rotary control one notch counter-  
7
twice.  
The tuner starts the automatic station seek  
tuning; the display shows "FM TSTORE" or  
"AM TSTORE". After the storing is completed,  
the radio plays the station at memory location  
1 of the FMT or AMT level.  
7
clockwise or clockwise to start the PTY seek  
tuning.  
Notes:  
During the seek tuning, "SEARCH" and the  
currently selected programme type are  
shown on the display.  
For the reception area "EUROPE": If the  
priority for traffic information is switched  
on (  
), only traffic information stations  
As soon as a station with the desired pro-  
gramme type is found, it remains being tuned  
into.  
are stored.  
If the FMT or AMT memory bank is deac-  
tivated (see the chapter "User settings",  
section "Making settings in the "TUNER"  
menu", menu item "BAND SELECTION"), it  
is automatically reactivated if you initiate  
the Travelstore function.  
Notes:  
If no station with the selected programme  
type is found, "NO PTY" is briefly displayed  
and 2 beeps can be heard. The radio will  
then retune to the station that it played  
last.  
9
Radio mode | CD/MP3/WMA/iPod mode  
If the tuned radio station or another sta-  
tion on the broadcasting network broad-  
casts your selected programme type at a  
later point in time, the car sound system  
will automatically switch from the cur-  
rently tuned station or from the current  
audio source (e.g. CD) to the station whose  
programme type matches the one you se-  
lected. Note that this function is not sup-  
ported by all stations.  
characters reduces the number of tracks  
and folders that the car sound system can  
recognise)  
No umlauts or special characters  
CD formats: audio CD (CDDA), CD-R/RW,  
Ø: 12 cm  
CD data formats: ISO 9669 Level 1 and 2, Joliet  
CD burn speed: Max. 16x (recommended)  
USB format/file system: Mass storage device/  
FAT16/32  
Memory card file system: FAT16/32  
File extension of audio files:  
Configuring the display  
u
Press the DIS button  
A
to toggle between  
.MP3 for MP3 files  
.WMA for WMA files  
these displays:  
Display  
Meaning  
WMA files only without Digital Rights Manage-  
ment (DRM) and created with Windows Media  
Player version 8 or later  
MP3 ID3 tags: Version 1 and 2  
Bitrate for creating audio files:  
ABCDEF  
Station name  
Memory bank/memory  
location/frequency  
FM1 P1 89.90  
FM1 P1 08:40  
Memory bank/memory  
location/time  
MP3: 32 to 320 kbps  
WMA: 32 to 192 kbps  
Maximum number of files and directories: Up  
to 30,000 files/500 directories depending on  
the data structure  
CD/MP3/WMA/iPod mode  
Basic information  
iPod mode  
CD/MP3/WMA mode  
You can connect numerous iPod and iPhone mod-  
els to the car sound system via the USB port in the  
front of the device and the USB port at the rear  
and control the audio playback from the car sound  
system.  
This car sound system can be used to play audio  
CDs (CDDA) and CD-R/RWs with audio, MP3 or  
WMA files as well as MP3 or WMA files on USB data  
carriers and SD(HC)/MMC memory cards.  
Notes:  
Notes:  
To ensure proper functioning, use only CDs  
with the Compact-Disc logo.  
Blaupunkt cannot guarantee the flawless  
function of all iPod and iPhone models.  
Blaupunkt cannot guarantee the flawless  
function of copy-protected CDs and all  
CD blanks, USB data carriers and memory  
cards available on the market.  
If an iPhone and iPod are connected at the  
same time, the devices are charged via the  
USB ports. If two iPhones are connected at  
the same time, charging is not possible.  
Note the following information when preparing  
an MP3/WMA data carrier:  
Use a suitable adapter cable to connect your iPod  
or iPhone with the USB port of the car sound sys-  
tem.  
Naming of tracks and directories:  
Max. 32 characters without the file exten-  
sion ".mp3" or ".wma" (the use of more  
10  
CD/MP3/WMA/iPod mode  
Note:  
Changing to CD/MP3/WMA/iPod  
mode  
You must not hinder or assist the drive as it  
automatically draws in the CD.  
u
Press the SRC button  
@
repeatedly until the  
u
Insert the CD with its printed side up into the  
CD tray  
desired audio source is displayed:  
5
until you feel a slight resistance.  
"CD": Inserted CD.  
The drive automatically draws in the CD and  
checks its data. Afterwards, the playback  
starts in CD or MP3 mode.  
"SD(HC)": Inserted memory card  
"USB FRONT" or "USB REAR": USB data  
carrier connected to the front or rear.  
Note:  
"IPOD FRONT" or "IPOD REAR": iPod con-  
nected to the front or rear  
If the inserted CD cannot be played back, "CD  
ERROR" is briefly displayed and the CD is au-  
tomatically ejected after approx. 2 seconds.  
"AUX": Connected external audio source.  
Notes:  
Ejecting a CD  
Note:  
The respective audio source can be select-  
ed only if a corresponding CD is inserted or  
a corresponding device is connected.  
You must not hinder or assist the drive as it  
ejects the CD.  
A connected iPod is initially selected un-  
der "USB" and, as soon as the iPod is recog-  
nised, under "IPOD".  
u
Press the  
CD.  
button  
8
to eject an inserted  
Notes:  
If the car sound system first has to read  
the data of a connected device or data car-  
rier before the playback, the display shows  
"READING". The duration of the reading  
depends on the data volume and design  
of the device or data carrier. If the device  
or data carrier is defective or the trans-  
ferred data cannot be played back, a corre-  
sponding message appears on the display  
(e.g. "CD ERROR").  
If a CD is ejected and not removed, the  
drive will automatically draw it back in  
again after approx. 10 seconds.  
You can also eject CDs while the car sound  
system is switched off or whilst another au-  
dio source is activated.  
Connecting/removing a USB data  
carrier  
Inserting/ejecting a CD  
Note:  
You can connect USB data carriers to the USB  
port at the front of the device as well as the  
rear USB port.  
Inserting a CD  
Risk of severe damage to the CD  
drive!  
Connecting a USB data carrier  
Noncircular contoured CDs (shape CDs)  
and CDs with a diameter of 8 cm (mini CDs) must  
not be used.  
u
Switch off the car sound system so that the  
data carrier will be correctly registered.  
u
First, pull the protective cap of the USB port  
We accept no responsibility for any damage to the  
CD drive that may occur as a result of the use of  
unsuitable CDs.  
:
to the front until it moves out of the port  
and fold it to the right to connect a data car-  
rier to the USB port at the front of the device.  
u
u
Connect the USB data carrier.  
Turn on the car sound system.  
11  
CD/MP3/WMA/iPod mode  
If the USB data carrier is initially selected as  
audio source, the data are read first.  
Selecting tracks  
u
Turn rotary control  
7
one notch counter-  
Notes:  
clockwise or clockwise to change to the pre-  
vious/next track.  
If the connected USB data carrier cannot  
be seen, "USB ERROR" is briefly displayed.  
Notes:  
The time required for reading in the data  
depends on the design and size of the USB  
data carrier.  
If you turn rotary control  
7
several  
notches counter-clockwise or clockwise,  
you jump forward or reverse by the corre-  
sponding number of tracks.  
Removing a USB data carrier  
If the current track plays longer than 3  
seconds and you turn rotary control  
u
Switch off the car sound system so that the  
data carrier will be correctly unregistered.  
7
by  
one notch counter-clockwise or clockwise,  
the tracks starts playing again.  
u
u
Disconnect the USB data carrier.  
After you pulled off the data carrier from the  
USB port at the front of the device, close the Fast searching  
protective cap of the USB port  
:.  
u
Press the rotary control  
7
once.  
The display briefly shows "CUE/REVIEW".  
Inserting/removing the memory card  
u
Turn the rotary control  
7
until the desired  
Inserting the memory card  
position has been reached.  
u
u
Detach the control panel.  
Note:  
Insert the memory card with its labelled side  
up and its contacts first into the card slot  
until it clicks into place.  
If you press the rotary control  
display briefly shows "TRACK SELECT". By  
turning the rotary control  
different track.  
7
twice, the  
B
7, you select a  
u
Attach the control panel.  
After switch-on, the device automatically  
selects the inserted memory card as audio  
source. The data of the memory card are be-  
ing read. Afterwards, the playback starts in  
MP3 mode.  
Interrupting playback  
u
Press the 3 button  
>
to interrupt the  
playback ("PAUSE") or to continue it.  
Scanning all tracks  
The scan function scans all available tracks.  
Notes:  
If the inserted memory card cannot be  
played, "SD ERROR" is briefly displayed.  
u
Press the rotary control  
7
for approx. 2 sec-  
onds to start the scan, or briefly to continue  
The time required for reading the card  
depends on the design and size of the  
memory card.  
playing the currently scanned track.  
During the scan, the display alternately dis-  
plays "SCAN" and the current track number  
or file name.  
Removing the memory card  
u
u
u
u
Detach the control panel.  
Note:  
Push on the memory card until it disengages.  
The scan time can be adjusted (see the chap-  
ter "User settings", section "Making settings  
in the "VARIOUS" menu", menu item "SCAN  
TIME").  
Pull the memory card out of the card slot  
Attach the control panel.  
B.  
12  
CD/MP3/WMA/iPod mode  
Playing tracks in random order  
Configuring the display  
u
Press the 5 MIX button  
>
to change among  
u
Press the DIS button  
A
once or several times  
the playback modes:  
to toggle between these displays:  
Opera- Display  
tion  
Meaning  
Opera- Display / icon  
tion  
Meaning  
CD/  
Track num-  
ber and play-  
ing time  
MIX ALL  
iPod  
Mixing tracks  
TRACK 01 00:15  
Mixing tracks of  
the current folder  
MIX FOLDER  
Track  
number and  
duration  
MP3/  
WMA  
TRACK 01 03:37  
TRACK 01 08:40  
CD  
Mixing tracks of  
the data carrier  
MIX ALL  
Track  
number and  
time  
Gen.  
MIX OFF  
Regular playback  
If the MIX function is switched on, the icon  
MIX (mix all tracks) or MIX (mix tracks of  
current folder) is shown on the display.  
ABCDEF /  
ABCDEF /  
ABCDEF /  
ABCDEF /  
ABCDEF /  
PLAY TIME 00:15  
File name ²  
Track name ¹  
Artist ¹  
Repeatedly playing individual tracks  
or directories  
Album ¹  
MP3/  
WMA/  
iPod  
Genre ³  
u
Press the 4 RPT button  
the playback modes:  
>
to change among  
Playing time  
Track dura-  
tion  
Opera- Display  
tion  
Meaning  
TOTAL TIME 03:37  
ALL INFO /  
All informa-  
tion as scroll-  
ing text  
CD/  
iPod  
Repeating  
tracks  
REPEAT TRACK  
REPEAT TRACK  
REPEAT FOLDER  
REPEAT OFF  
Repeating  
tracks  
¹ Track name, artist and album name must be  
stored as ID3 tag to be able to display them.  
² The file name is displayed only in MP3/WMA  
mode.  
³ The genre information is available only on  
iPod mode.  
MP3/  
WMA  
Repeating  
folders  
Regular  
playback  
Gen.  
If the REPEAT function is switched on, the icon  
Note:  
(repeat tracks) or  
(repeat  
With every track change, the file name is  
briefly shown in MP3/WMA mode and the  
track name in iPod mode before the display  
switches to the defined display.  
folders) is shown on the display.  
13  
CD/MP3/WMA/iPod mode  
Browse mode in iPod mode  
Browse mode  
In Browse mode, you can directly search for and  
select a certain track on the MP3/WMA data carrier  
or iPod without interrupting the current playback.  
In iPod mode, you can select and play the tracks  
via the categories "ARTISTS", "ALBUMS", "GENRES"  
or "PLAYLISTS".  
u
Press the 2 ID3 button  
Browse mode in the iPod mode.  
>
to call up the  
Browse mode in MP3/WMA mode  
In MP3/WMA mode, you can select and play a  
track from a directory of the data carrier.  
The display shows the  
first category, "ARTISTS", is displayed.  
icon. The  
u
Briefly press the 1 LIST button  
the browse mode in MP3/WMA mode.  
>
to call up  
Notes:  
Press the 2 ID3 button  
>
for approx.  
The display shows the  
icon. The  
2 seconds to directly call up the "PLAYLISTS"  
first or current folder on the data carrier and  
category.  
the  
icon are displayed.  
The browse mode remains switched on for  
5 minutes without confirming a selection.  
Notes:  
The first folder is displayed only if the  
browse mode has been called for the first  
time after inserting or connecting the data  
carrier. Afterwards, the current folder is  
displayed whenever the browse mode is  
called.  
You can exit the browse mode at any time  
by pressing the 2 ID3 button  
>.  
u
u
Turn the rotary control  
category "ALBUMS"  
or "PLAYLISTS"  
7
to select the  
,
"GENRES"  
.
Press the rotary control  
available folders of the category.  
7
to display the  
The browse mode remains switched on for  
5 minutes without confirming a selection.  
The first folder of the selected category is  
shown on the display (e.g. "JAZZ" in the  
"GENRES" category).  
You can exit the browse mode at any time  
by pressing the 1 LIST button  
>.  
u
u
Turn the rotary control  
ent folder.  
7
to select a differ-  
Note:  
To return to the list of categories, turn the  
Press the rotary control  
tracks of the selected folder.  
7
to display the  
rotary control  
7
until the "<<<" option is  
selected and press the rotary control  
7.  
The first track of the folder and the icon are  
shown on the display.  
u
u
Turn the rotary control  
ent folder.  
7
to select a differ-  
Note:  
Press the rotary control  
available tracks of the folder.  
7
to display the  
To return to the folder list, turn the rotary con-  
trol  
7
until the "<<<" option is selected and  
The first track of the folder is shown on the  
display.  
press the rotary control  
7.  
u
u
Turn the rotary control  
ent track.  
7
to select a differ-  
Note:  
To return to the folder list, turn the rotary con-  
Press the rotary control  
7
to play the track.  
trol  
7
until the "<<<" option is selected and  
The playback starts. You are exiting the  
browse mode.  
press the rotary control  
7.  
u
Turn the rotary control  
ent track.  
7
to select a differ-  
14  
CD/MP3/WMA/iPod mode | Bluetooth®  
u
Press the rotary control  
7
to play the track.  
Bluetooth®  
(Toronto 420 BT only)  
The playback starts. You are exiting the  
browse mode.  
You can connect theToronto 420 BT via Bluetooth®  
with other Bluetooth®-ready devices, such as cell  
phones or MP3 players. This allows you to use the  
car sound system with its integrated microphone  
as hands-free system for connected cell phones  
and control the audio output of other Bluetooth®  
devices and play them back via the loudspeakers  
of the car sound system (Bluetooth® streaming).  
Searching by track names  
(not in iPod mode)  
On MP3/WMA data carriers, you can find a track  
based on its file name and start the playback.  
u
Press the 1 LIST button  
>
for approx. 2 sec-  
onds to start the search function.  
Note:  
You can now enter a file name with up to  
16 characters:  
You can also connect an external microphone  
for hands-free calling (see the chapter "Instal-  
lation instructions").  
Notes:  
You do not have to enter the complete file  
name. You can enter only the first charac-  
ters of the file name and select the desired  
track from the list of tracks found.  
Bluetooth® technology is a wireless connection of  
short range. For this reason, Bluetooth® devices  
must be located near the car sound system (in the  
vehicle) to establish and maintain a connection.  
To establish a Bluetooth® connection, you must  
first pair the car sound system and the Bluetooth®  
device. When you pair the devices, a Bluetooth®  
connection is subsequently established automati-  
cally. This connection remains in effect as long as  
the Bluetooth® device is within range. If the con-  
nection is interrupted, e.g. because you moved  
the cell phone outside the range, the connection  
is automatically re-established as soon as you are  
back within range.  
You can exit the search function at any  
time by briefly pressing the 1 LIST button  
>.  
u
u
u
Turn the rotary control  
7
to select a charac-  
ter for the respective position.  
Press the rotary control  
position.  
7
>
to go to the next  
for approx. 2 sec-  
Press the 1 LIST button  
onds to start the search.  
You can connect only one cell phone and stream-  
ing device with the car sound system at a time.  
If you connect a new device with the car sound  
system, the connection to a currently connected  
device may automatically be interrupted. How-  
ever, the car sound system leaves up to 5 different  
Bluetooth® devices paired, and you can quickly  
and easily connect any of these devices with the  
car sound system again.  
All tracks corresponding to the file name en-  
tered are listed.  
u
u
If necessary, turn the rotary control  
select a track.  
7
to  
Press the rotary control  
back.  
7
to start the play-  
Bluetooth® menu  
In the Bluetooth® menu, you find all the functions  
for pairing, connecting and managing Bluetooth®  
devices.  
15  
Bluetooth®  
Calling the Bluetooth® menu  
Pairing and connecting a cell phone  
Note:  
u
u
u
u
u
u
Briefly press the MENU  
2
button to open  
until the "BLUE-  
the user menu.  
If a connection with a cell phone currently ex-  
ists, this connection is automatically discon-  
nected if you pair and connect another cell  
phone.  
Turn the rotary control  
TOOTH" menu item is selected.  
7
Press the rotary control  
tooth® menu.  
7
to open the Blue-  
u
u
In the Bluetooth® menu, select the "PAIRING"  
menu item.  
Turn the rotary control  
menu item is selected.  
7
until the desired  
Press the rotary control  
7
to open the menu.  
Perform the setting (see the following sec-  
tions).  
The "MOBILE PHONE" menu item is selected.  
u
Press the rotary control  
phone.  
7
to register a cell  
Briefly press the MENU button  
menu.  
2
to exit the  
The display shows "PAIRING" and the Blue-  
tooth® symbol is flashing. The car sound  
system can now be recognised by a Blue-  
tooth® cell phone for approx. 2 minutes and  
connected.  
Notes:  
The Bluetooth® menu is automatically ex-  
ited approx. 60 seconds after the last but-  
ton activation and you are returned to the  
display of the current audio source.  
u
u
Search the car sound system from your cell  
phone (Bluetooth® name: "BP 420 BT").  
To go back to the next higher-level menu,  
turn the rotary control  
7
until the "<<<"  
As soon as the car sound system is located  
by the cell phone and is to be connected, the  
display briefly shows "ENTER PIN" and the cur-  
rently stored PIN (by default "1234").  
option is selected and press the rotary con-  
trol  
If  
7.  
a
Bluetooth® process is running (e.g.  
re-establishing the connection to the last  
connected device), the functions of the  
Bluetooth® menu are blocked. If you at-  
tempt to open the Bluetooth® menu dur-  
ing this time, "LINK BUSY" briefly appears  
on the display. If you want to cancel the  
Bluetooth® process and open the Blue-  
Establish the connection from your cell  
phone. Enter the PIN displayed by the car  
sound system.  
The display may show "PAIRED", followed by  
"CONNECTED", as soon as the car sound sys-  
tem and the cell phone are paired and con-  
nected.  
tooth® menu, press the  
button  
<.  
Notes:  
If no connection can be established, the dis-  
play briefly shows "CONNECT FAILED".  
Pairing and connecting a device  
Note:  
You can pair up to 5 Bluetooth® devices with  
this car sound system. Before you can pair a  
sixth device, you must first unpair one of the  
5 already paired devices (see ch. "Additional  
functions in the Bluetooth® menu", section  
"Managing paired devices").  
If you should attempt to pair a sixth Blue-  
tooth® device, "PHONE LIST FULL – PLEASE  
DELETE ENTRIES FROM LIST" is displayed.  
Pairing and connecting a Bluetooth®  
streaming device  
Note:  
If a connection with a streaming device cur-  
rently exists, this connection is automatically  
disconnected if you pair and connect another  
streaming device.  
16  
Bluetooth®  
u
u
In the Bluetooth® menu, select the "PAIRING"  
menu item.  
Notes:  
If no connection can be established, the  
display briefly shows "CONNECT FAILED".  
Press the rotary control  
7
to open the menu.  
After switch-on, the car sound system  
automatically attempts to reconnect the  
device connected last. If the connection  
attempt fails, the display briefly shows  
"CONNECTION LOST". If necessary, attempt  
to re-establish the connection from the  
streaming device.  
The "MOBILE PHONE" menu item is selected.  
u
u
Turn the rotary control  
"STREAMING" menu item.  
7
7
to select the  
to register  
Press the rotary control  
streaming device.  
a
The display shows the currently stored  
PIN (default "1234"). If required, enter the  
PIN of the streaming device:  
Telephone functions  
u
u
Turn the rotary control  
7
to select a digit for  
Answering/rejecting an incoming phone call  
the respective position.  
With an incoming call, the display alternately  
shows "INCOMING CALL" and the number of the  
caller. The current audio source is muted and a  
ring tone is played via the loudspeakers of the car  
sound system.  
Press the rotary control  
position.  
7
to go to the next  
Notes:  
To return to the previous position for the  
PIN entry, turn the rotary control until  
the "<<<" option is selected, and press the  
rotary control  
Note:  
7
If the number of the caller is not being trans-  
mitted, the display shows "PRIVATE NUM-  
BER" instead of the number. If the number  
of the caller is stored together with a name,  
the name of the entry and the number are  
displayed (see the section "Storing a phone  
number in the car sound system" in this chap-  
ter).  
7
.
Not all streaming devices require the entry  
of a PIN on the car sound system. For some  
streaming devices, you have to enter the  
PIN of the car sound system instead. For  
these devices, press only the rotary control  
7
repeatedly until you reach beyond the  
last position, thereby confirming the cur-  
rent PIN, and then enter this PIN on the  
streaming device.  
u
u
Press the  
button  
=
to answer the call.  
"CALL" and the duration of the ongoing call  
are displayed.  
The display shows "PAIRING" and the Blue-  
tooth® symbol is flashing. The car sound sys-  
tem can now be recognised by the streaming  
device for approx. 2 minutes and connected.  
Press the  
to end the current call.  
<
button to reject the call or  
The display shows "CALL END".  
Notes:  
u
Searchthecarsoundsystemfromyourstream-  
ing device (Bluetooth® name: "BP 420 BT") and  
establish the connection. Enter the PIN of the  
car sound system, if necessary.  
During the call, you can adjust the volume  
with the volume control or mute the  
device with a short press of the On/Off  
button  
4
3
.
The display may show "PAIRED", followed by  
"CONNECTED", as soon as the car sound sys-  
tem and the streaming device are paired and  
connected.  
You can adjust the volume for the call play-  
back in the user menu (see the chapter  
"User settings", section "Making settings in  
the "VOLUME" menu", menu item "HANDS-  
FREE VOL").  
17  
Bluetooth®  
Making a call  
u
u
Turn the rotary control  
ent entry.  
7
to select a differ-  
u
In the Bluetooth® menu, select the "DIAL NEW  
NUMBER" menu item.  
Press the rotary control  
ton to call the number.  
7 or the but-  
=
u
Press the rotary control  
menu.  
7
to open the entry  
"CALLING" and the dialed number are alter-  
nately shown on the display.  
You can now enter a phone number with up  
to 20 digits:  
Note:  
u
u
Turn the rotary control  
7
to select a digit for  
You can also call an entry in the phone book  
via speed dial (see the section "Speed dial for  
phone book entries" in this chapter).  
the respective position.  
Press the rotary control  
position.  
7
to go to the next  
Making a call with voice dial  
Note:  
Note:  
To return to the previous position in the en-  
try menu, turn the rotary control until the  
"<<<" option is selected, and press the rotary  
control  
This function is only available if the connected  
cell phone supports voice dial.  
7
u
u
In the Bluetooth® menu, select the "VOICE  
DIAL" menu item.  
7
.
u
Press the  
entered.  
button  
=
to call the number  
Press the rotary control  
7
or the  
but-  
ton to activate voice recognition.  
=
"CALLING" and the dialed number are alter-  
nately shown on the display.  
The car sound system is muted and the dis-  
play shows "SPEAK NOW".  
As soon as your calling party answers the call,  
the display shows "CALL" and the time of the  
current phone call.  
u
Say the name of the desired calling partner.  
Notes:  
Upon ending the call, the display briefly  
shows "CALL END".  
If no Bluetooth® connection is established  
when voice recognition is activated,  
the display briefly shows "VOICE DIAL  
FAILED – NO BT CONNECTION".  
Calling an entry in the phone book  
Note:  
If the spoken name is not being recognised  
or the time for the voice recognition has  
already expired, the display briefly shows  
"DIAL FAILED".  
This function is available only if the phone  
book of the connected cell phone was trans-  
ferred to the car sound system (see the chap-  
ter "Phone book functions").  
You can cancel the voice recognition by  
u
u
In the Bluetooth® menu, select the "PHONE-  
BOOK" menu item.  
pressing the  
button  
<.  
Please note that the duration of the voice  
recognition is limited and depending on  
the respective cell phone.  
Press the rotary control  
book.  
7
to open the phone  
The display shows the first phone book entry.  
You can also activate the voice recognition  
via speed dial (see the section "Speed dial  
for voice dial" in this chapter).  
Note:  
If the phone book has not yet been trans-  
ferred, the display briefly shows "PHONE-  
BOOK NOT AVAILABLE".  
18  
Bluetooth®  
Storing a phone number in the car sound  
system  
Speed dial for any phone number or for the  
number dialed last or a stored number  
You can store phone numbers in the car sound  
system and make calls using the speed dial (see  
the following section).  
With speed dial, you can make a call without first  
having to select the corresponding function in the  
Bluetooth® menu.  
A phone number is stored for the currently con-  
nected telephone and is available only for this tel-  
ephone. The car sound system can store up to five  
numbers for up to five paired devices.  
To call the number dialed last,  
u
press the  
button  
=.  
The display shows the number dialed last.  
Note:  
u
Enter the phone number as described in the  
section "Making a call".  
If no cell phone is currently connected, the  
Bluetooth® menu is opened. The "PAIRING"  
menu item is selected.  
u
Press the desired memory button 1 - 5  
>
for  
approx. 2 seconds to store only the number.  
u
Press the  
button  
=
to call the number.  
- or -  
"CALLING" and the dialed number are alter-  
nately shown on the display.  
u
Press the rotary control  
7
for approx. 2 sec-  
onds to enter a name for the entry.  
To call a stored number,  
You can now enter a name with up to 15 char-  
acters:  
u
u
press the  
button  
=.  
Press a memory button 1 - 5  
number stored.  
>
to call the  
u
u
Turn the rotary control  
7
to select a charac-  
ter for the respective position.  
Note:  
Press the rotary control  
position.  
7
to go to the next  
If no number is stored under the selected  
memory button, the display briefly shows  
"NO NUMBER".  
Note:  
To return to the previous position in the en-  
try menu, turn the rotary control until the  
"<<<" option is selected, and press the rotary  
control  
Press the desired memory button  
u
Press the  
button  
=
to call the number.  
7
"CALLING" and the dialed number are alter-  
nately shown on the display.  
7.  
To call any number,  
u
u
u
press the  
button  
=.  
1 - 5  
>
for approx. 2 seconds to store the  
number and name.  
Press the On/Off button  
3
to open the entry  
menu and enter a number (enter the phone  
number as described in the section "Making  
a call").  
The display briefly shows "NUMBER SAVED".  
Afterwards, you are returned to the Blue-  
tooth® menu and the "DIAL NEW NUMBER"  
menu item.  
u
Press the  
button  
=
to call the number.  
Notes:  
"CALLING" and the dialed number are alter-  
nately shown on the display.  
A number previously stored on the memo-  
ry button is replaced.  
If a telephone is unpaired, the numbers  
stored for this telephone are automatically  
deleted.  
19  
Bluetooth®  
Speed dial for phone book entries  
Bluetooth® streaming mode  
Note:  
Starting the Bluetooth® streaming mode  
This function is only available  
u
Press the SRC  
@
button repeatedly until  
if the phone book of the connected cell  
phone was transferred to the car sound  
system (see the chapter "Phone book func-  
tions").  
if the speed dial is set for phone book en-  
tries (see the chapter "Additional functions  
in the Bluetooth® menu", section "Setting  
the button function for speed dial").  
"BT-STREAM" appears on the display.  
The playback starts.  
Notes:  
The Bluetooth® streaming mode can be se-  
lected only if a suitable streaming device  
is connected.  
If the connection to the streaming device  
is lost during playback, the display briefly  
shows "CONNECTION LOST" and the car  
sound system changes to the previous au-  
dio source.  
To select an entry of the phone book with the  
speed dial and call it,  
u
press the  
onds.  
button  
=
for approx. 2 sec-  
The display shows the first phone book entry.  
Selecting tracks  
Turn rotary control  
u
u
If necessary, select another entry as described  
in the section "Calling an entry in the phone  
book".  
u
7
one notch counter-  
clockwise or clockwise to change to the pre-  
vious/next track.  
Press the  
button  
=
to call the number.  
"CALLING" and the dialed number are alter-  
nately shown on the display.  
Interrupting playback  
Press the 3 button  
playback ("PAUSE") or to continue it.  
u
>
to interrupt the  
Speed dial for voice dial  
Note:  
Phone book functions  
This function is only available  
Transferring the phone book of the cell phone  
to the car sound system  
You can transfer the phone book of the connected  
cell phone to the car sound system to call entries  
of the phone book using the car sound system.  
if the connected cell phone supports voice  
dial.  
if the speed dial is set for voice dial (see the  
chapter "Additional functions in the Blue-  
tooth® menu", section "Setting the button  
function for speed dial").  
Notes:  
To activate the voice recognition with the speed  
dial,  
The car sound system accepts only entries  
from the memory of the telephone and  
not from the SIM card inserted in the tel-  
ephone.  
u
press the  
onds.  
button  
=
for approx. 2 sec-  
The car sound system is muted and the dis-  
play shows "SPEAK NOW".  
The transfer does not delete the phone  
book from the cell phone.  
u
Say the name of the desired calling partner.  
The car sound system can store the phone books  
of the paired telephones with a total of up to 960  
entries. If several numbers are stored on the tel-  
ephone for one contact (e.g. landline, cell phone  
number, office number and similar), each number  
is stored as a separate entry by the car sound sys-  
tem.  
20  
Bluetooth®  
Each entry consists of a name and a number, each  
up to 20 characters on digits.  
If you insert a CD during an ongoing trans-  
fer, the playback does not start until the  
transfer is completed.  
Note:  
Do not switch off the car sound system while  
transferring the phone book. If you do or if the  
power supply of the car sound system should  
be interrupted for any reason, you have to re-  
start the transfer.  
Deleting the phone book of the cell phone  
from the car sound system  
You can delete the phone book of the connected  
cell phone.  
Note:  
u
u
In the Bluetooth® menu, select the "DOWN-  
LOAD P–BOOK" menu item.  
The telephone remains connected.  
u
u
In the Bluetooth® menu, select the "DELETE  
P–BOOK" menu item.  
Press the rotary control  
The display shows "CONFIRM".  
Press the rotary control again.  
7.  
Press the rotary control  
The display shows "CONFIRM".  
Press the rotary control again.  
7.  
u
7
"PHONEBOOK DOWNLOADING  
WAIT" appears on the display.  
PLEASE  
u
7
After the download is complete, the display  
briefly shows "DOWNLD COMPLETE".  
Additional functions in the  
Bluetooth® menu  
Notes:  
Changing the Bluetooth® PIN  
To cancel the transfer, press the  
ton  
but-  
The factory-set Bluetooth® PIN of the car sound  
system is "1234"; e.g. it must be entered on the  
cell phone when pairing a cell phone. This PIN can  
be changed.  
<
.
If the transfer of the phone book fails,  
the display briefly shows "DOWNLOAD  
FAILED".  
u
In the Bluetooth® menu, select the "PIN EDIT"  
menu item.  
If the transfer of the phone book exceeds  
the storage capacity of the car sound sys-  
tem, the display briefly shows "PHONE-  
BOOK FULL". The phone book entries trans-  
ferred so far remain stored.  
u
Press the rotary control  
menu.  
7
to open the entry  
You can now enter the PIN:  
If you supplemented or changed entries  
on your cell phone since the last transfer,  
you can update the phone book on the car  
sound system by transferring it again. If the  
storage capacity of the car sound system  
is exceeded in the process, first delete the  
already transferred phone book (see the  
next section) or unpair another cell phone,  
if necessary, so that its phone book is also  
deleted from the car sound system (see the  
chapter "Additional functions in the Blue-  
tooth® menu", section "Managing paired  
devices").  
u
u
Turn the rotary control  
7
to select a digit for  
the respective position.  
Press the rotary control  
position.  
7
to go to the next  
Note:  
To return to the previous position in the  
entry menu, turn the rotary control until  
the "<<<" option is selected, and press the  
rotary control  
7
7
.
21  
Bluetooth®  
Managing paired devices  
To unpair the displayed device,  
u
press the  
onds.  
button  
<
for approx. 2 sec-  
In the Bluetooth® menu, you can manage the  
paired Bluetooth® devices (cell phones and  
streaming devices such as MP3 player).  
In the device lists for cell phones and streaming  
devices, the Bluetooth® names or addresses of the  
paired devices are displayed. You can do the fol-  
lowing:  
The display briefly shows "DELETED" and you  
are returned to the Bluetooth® menu.  
Note:  
If a telephone is unpaired, the numbers stored  
for this telephone and a phone book trans-  
ferred from this cell phone are automatically  
deleted.  
Disconnecting the connection to the currently  
connected Bluetooth® device  
Establishing a connection to one of the paired  
Bluetooth® devices  
To unpair all the cell phones or streaming devices,  
u
u
select the "DELETE ALL" menu item.  
Press the rotary control  
The display shows "CONFIRM".  
Press the rotary control or the  
ton again.  
The display briefly shows "EMPTY LIST".  
Unpairing Bluetooth® devices  
7
.
u
In the Bluetooth® menu, select the menu item  
"PHONE LIST" or "STREAMING LIST".  
u
Press the rotary control  
7
to open the menu.  
u
7
but-  
=
The first device on the list is displayed.  
Note:  
If no device is paired, "EMPTY LIST" is briefly  
displayed.  
Setting the button function for speed dial  
You can select whether the long press of the  
u
Turn the rotary control  
7
to select a different  
button  
=
voice dial.  
opens the phone book or activates  
device or the "DELETE ALL" option.  
You have the following options:  
To connect the displayed device,  
u
In the Bluetooth® menu, select the "SOFTKEY"  
menu item.  
u
press the  
button  
=.  
Next to "SOFTKEY", the current "P–BOOK" set-  
ting for phone book or "VOICE" for voice dial  
is displayed.  
As soon as the device is connected, "CON-  
NECTED" is briefly displayed and you are re-  
turned to the Bluetooth® menu.  
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
Note:  
Turn the rotary control  
tween the settings.  
If no connection can be established, the  
display briefly shows "CONNECT FAILED". If  
the device is already connected, the display  
briefly shows "CONNECT EXIST".  
Press the rotary control  
setting.  
To disconnect the connection to the displayed  
device,  
u
press the  
button  
<.  
The display briefly shows "DISCONNECTED"  
and you are returned to the Bluetooth® menu.  
Note:  
If the device was not connected, the display  
briefly shows "NO CONNECTION".  
22  
External audio sources | Sound settings  
External audio sources  
Front AUX-IN socket  
Danger!  
Sound settings  
The following sound settings can be changed in  
the "AUDIO" menu:  
Adjusting bass and treble  
Setting the left/right volume distribution  
(Balance) or front/rear (Fader)  
Increased risk of injury from  
connector.  
Adjusting the increase of bass at low volume  
(Loudness)  
In case of an accident, the protruding connector  
in the front AUX-IN socket may cause injuries. The  
use of straight plugs or adapters leads to an in-  
creased risk of injury.  
Selecting a sound profile (Sound Preset)  
Setting level and frequency of the preamplifier  
output (Sub-Out)  
For this reason, we recommend using angled  
jack plugs, e.g. the Blaupunkt accessories cable  
(7 607 001 535).  
Setting the 3-band equaliser  
Adjusting the time delay for switching in an  
external amplifier  
As soon as an external audio source, such as a  
portable MP3 player is connected to the front  
Calling and exiting the "AUDIO"  
menu  
AUX-IN socket  
;, it can be selected with the SRC  
u
u
u
u
Briefly press the MENU button  
2
to open  
button . "AUX" then appears on the display.  
@
the user menu.  
Notes:  
Turn the rotary control  
menu item is selected.  
7
until the "AUDIO"  
to open the  
7 until the desired  
You can enter an individual name for the  
AUX source that is shown on the display in  
AUX mode (see the chapter "User settings",  
section "Making settings in the "VARIOUS"  
menu", menu item "AUX EDIT").  
Press the rotary control  
"AUDIO" menu.  
7
Turn the rotary control  
menu item is selected.  
You can play back an AUX source at the  
same time with one of the internal audio  
sources of the car sound system. Hence,  
you can play back the announcements of  
a navigation device connected to the front  
u
u
Perform the setting (see the next section).  
Briefly press the MENU button  
2
to exit the  
menu.  
AUX-IN socket  
;
via the loudspeakers of  
Notes:  
the car sound system while listening to  
the radio or a CD at the same time. In ad-  
dition, you can adjust the volume levels of  
both audio sources to each other. For more  
details, please read the section "Making  
settings in the "VARIOUS" menu", menu  
items "AUX MIX" and "AUX MIX GAIN" in  
the chapter "User settings".  
The menu is automatically exited approx.  
60 seconds after the last button activation  
and you are returned to the display of the  
current audio source.  
To go back to the next higher-level menu,  
turn the rotary control  
7
until the "<<<"  
option is selected and press the rotary con-  
trol  
7
.
23  
Sound settings  
LOUDNESS  
Making settings in the "AUDIO" menu  
Increase of bass at low volume. Settings: ON, OFF.  
BASS  
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
Bass level. Settings: –7 to +7.  
u
u
u
Press the rotary control  
setting.  
7
to change the  
Turn the rotary control  
tween the settings.  
Turn the rotary control  
level is set.  
7
until the desired  
Press the rotary control  
setting.  
Press the rotary control  
setting.  
7
to confirm the  
to change the  
PRESET EQ (sound profile)  
Selecting equalizer presettings. Settings: PRESET  
EQ POP, PRESET EQ ROCK, PRESET EQ CLAS (clas-  
sic), PRESET EQ OFF (sound profile off; no preset-  
ting).  
TREBLE  
Treble. Settings: –7 to +7.  
u
u
u
Press the rotary control  
setting.  
7
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
Turn the rotary control  
level is set.  
7
until the desired  
to confirm the  
Turn the rotary control  
tween the settings.  
Press the rotary control  
setting.  
7
Press the rotary control  
setting.  
BALANCE  
SUB-OUT  
Left/right volume distribution. Settings: L9 (left)  
to R9 (right).  
Setting the level and frequency of the preampli-  
fier output.  
u
u
u
Press the rotary control  
setting.  
7
to change the  
until the desired  
to confirm the  
u
u
Press the rotary control  
Turn the rotary control  
tween the following menu items:  
7
to open the menu.  
Turn the rotary control  
7
7
to change be-  
volume distribution is set.  
Press the rotary control  
setting.  
7
FREQUENCY  
(settings: 80/120/160 Hz)  
GAIN  
FADER  
(settings: 0 to +7)  
Front/rear volume distribution. Settings: R9 (rear)  
to F9 (front).  
u
u
u
Press the rotary control  
setting for the selected menu item.  
7
to change the  
u
u
u
Press the rotary control  
setting.  
7
to change the  
until the desired  
to confirm the  
Turn the rotary control  
frequency.  
7
to set the level or  
to confirm the  
Turn the rotary control  
volume distribution is set.  
7
Press the rotary control  
setting.  
7
Press the rotary control  
setting.  
7
24  
Sound settings  
AMP DELAY  
EQUALIZER  
Setting the delay with which a connect amplifier  
is switched in. Settings: 0.5/1.0/1.5/2.0/2.5 seconds  
Switching the equalizer on or off. Settings: ON,  
OFF.  
and OFF (no delay)  
.
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
u
u
u
Press the rotary control  
7
to change the  
until the desired  
to confirm the  
setting.  
Turn the rotary control  
tween the settings.  
Turn the rotary control  
delay is set.  
7
Press the rotary control  
setting.  
Press the rotary control  
setting.  
7
EQ TREBLE  
Adjusting treble frequency and level of the equal-  
izer.  
Setting the 3-band equaliser  
The radio features a 3-band equaliser. For each of  
the three treble, middle and bass bands, you can  
select a frequency as well as adjust the level. In ad-  
dition, you can adjust the quality factor for bass  
and middle.  
u
u
Press the rotary control  
Turn the rotary control  
tween the following menu items:  
7
to open the menu.  
7
to change be-  
FREQUENCY  
(settings: 10/12.5/15/17.5 kHz)  
The equaliser also provides an adjustable increase  
of the bass at low volume (X-bass).  
GAIN  
(settings: –7 to +7)  
Opening the "EQUALIZER" menu  
u
u
u
Press the rotary control  
7
to change the  
u
In the "AUDIO" menu, select the "EQUALIZER"  
menu item.  
setting for the selected menu item.  
Turn the rotary control  
frequency.  
7
to set the level or  
to confirm the  
u
u
Press the rotary control  
Turn the rotary control  
tween the following menu items:  
7
to open the menu.  
7
to change be-  
Press the rotary control  
setting.  
7
EQUALIZER  
EQ TREBLE  
EQ MIDDLE  
EQ BASS  
EQ MIDDLE  
Adjusting centre frequency and level of the equal-  
izer.  
u
u
Press the rotary control  
Turn the rotary control  
tween the following menu items:  
7
to open the menu.  
EQ X-BASS  
7
to change be-  
Note:  
The submenus in the "EQUALIZER" menu are  
not automatically exited after the last key has  
been activated. After the setting, press the  
FREQUENCY  
(settings: 0.5/1.0/1.5/2.5 kHz)  
MENU button  
2
to exit the menu.  
GAIN  
(settings: –7 to +7)  
Q-FACTOR  
(settings: 0.5/0.75/1.0/1.25)  
u
Press the rotary control  
7
to change the  
setting for the selected menu item.  
25  
Sound settings | User settings  
u
u
Turn the rotary control  
frequency or Q-factor.  
7
to set the level,  
to confirm the  
User settings  
Press the rotary control  
setting.  
7
Calling the user menu and selecting  
a menu  
u
Briefly press the MENU  
the user menu.  
2
button to open  
EQ BASS  
Adjusting bass frequency and level of the equal-  
izer.  
In the user menu, the user settings can be found in  
the following menus:  
u
u
Press the rotary control  
Turn the rotary control  
tween the following menu items:  
7
to open the menu.  
TUNER  
7
to change be-  
AUDIO (see chapter "Sound settings")  
DISPLAY  
VOLUME  
CLOCK  
FREQUENCY  
(settings: 80/100/200 Hz)  
GAIN  
(settings: –7 to +7)  
Q-FACTOR  
(settings: 1.0/1.25/1.5/2.0)  
VARIOUS  
BLUETOOTH (Toronto 420 BT only, see the  
chapter "Bluetooth®")  
u
u
u
Press the rotary control  
7
to change the  
u
u
u
u
u
Turn the rotary control  
menu is selected.  
7
until the desired  
setting for the selected menu item.  
Turn the rotary control  
frequency or Q-factor.  
7
to set the level,  
to confirm the  
Press the rotary control  
selected menu.  
7
to open the  
Press the rotary control  
setting.  
7
Turn the rotary control  
menu item is selected.  
7
until the desired  
Perform the setting (see the following  
sections).  
EQ X-BASS  
Adjusting the frequency and level for the increase  
of bass at low volume.  
Briefly press the MENU button  
menu.  
2
to exit the  
u
u
Press the rotary control  
Turn the rotary control  
tween the following menu items:  
7
to open the menu.  
Notes:  
7
to change be-  
The menu is automatically exited approx.  
60 seconds after the last button activation  
and you are returned to the display of the  
current audio source.  
FREQUENCY  
(settings: 60/80/100 Hz)  
GAIN  
(settings: 0 to +3)  
To go back to the next higher-level menu,  
turn the rotary control  
7
until the "<<<"  
u
u
u
Press the rotary control  
setting for the selected menu item.  
7
to change the  
option is selected and press the rotary con-  
trol  
7
.
Turn the rotary control  
frequency.  
7
to set the level or  
to confirm the  
Press the rotary control  
setting.  
7
26  
User settings  
Notes:  
Making settings in the "TUNER"  
menu  
In the factory default, all AM memory  
banks are deactivated.  
TRAFFICINFO (traffic information)  
(only for reception area EUROPE)  
Only possible in FM radio mode: Switching prior-  
ity for traffic announcements on or off. Settings:  
ON, OFF.  
If a memory bank is deactivated, the sta-  
tions stored in this memory bank are re-  
tained.  
REGIONAL  
(only for reception area EUROPE)  
Only possible in FM radio mode: Switching  
REGIONAL function on or off. Settings: ON, OFF.  
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
Turn the rotary control  
tween the settings.  
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
Press the rotary control  
setting.  
Turn the rotary control  
tween the settings.  
If priority is switched on for traffic information, the  
Press the rotary control  
setting.  
display shows the icon  
.
BAND SELECTION  
Activating or deactivating memory banks.  
SENSITIVITY  
Setting the sensitivity of station seek tuning. Set-  
tings: LO (–; low), HI (+; high).  
Memory banks that can be deactivated:  
Region  
Memory banks  
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
EUROPE  
USA  
SOUTH AMERICA  
THAILAND  
FM2, FMT, MW, LW  
FM2, FMT, AM, AMT  
FM2, FMT, AM, AMT  
FM2, FMT, AM, AMT  
Turn the rotary control  
tween the settings.  
Press the rotary control  
setting.  
Settings in each case: ON, OFF.  
RDS  
u
u
Press the rotary control  
7
to open the menu.  
until the desired  
Switching the RDS function on or off. Settings: ON,  
OFF.  
Turn the rotary control  
memory bank is set.  
7
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
u
u
Press the rotary control  
setting.  
7
to change the  
Turn the rotary control  
tween the settings.  
Turn the rotary control  
7
to toggle between  
the settings ON (activate memory bank) and  
Press the rotary control  
setting.  
OFF (deactivate memory bank).  
u
Press the rotary control  
setting.  
7
to confirm the  
Note:  
If the reception area "USA", "SOUTH AMERICA"  
or "THAILAND" is selected, RDS is automati-  
cally switched off. The station name continues  
to be shown on the display.  
Deactivated memory banks are skipped during  
the source selection with the SRC button  
@
.
27  
User settings  
PTY  
TUNER AREA (reception area)  
Switching the PTY function on or off. Settings: ON,  
OFF.  
Select the reception area for the radio reception.  
Settings: EUROPE, USA, SOUTH AMERICA, THAI-  
LAND.  
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
u
u
Press the rotary control  
7
to open the menu.  
Turn the rotary control  
tween the settings.  
Turn the rotary control  
tween the reception areas.  
7
to change be-  
Press the rotary control  
setting.  
u
Press the rotary control  
tion area.  
7
to select a recep-  
The display shows "PLEASE CONFIRM".  
PTY TYPES  
u
Press the rotary control  
selected reception area.  
7
to confirm the  
Only possible with activated PTY function: Select  
a programme type.  
Note:  
Making settings in the "DISPLAY"  
menu  
As soon as a programme type has been select-  
ed, this programme type is shown as menu  
item in the menu instead of "PTY TYPES".  
DIMMER  
u
u
u
Press the rotary control  
setting.  
7
to change the  
Select automatic or manual switching of the dis-  
play brightness for day or night. Settings: AUTO  
(display brightness is automatically switched by  
switching the driving lights on or o), MANUAL  
(display brightness can be switched manually).  
Turn the rotary control  
tween the available programme types.  
7
to change be-  
Press the rotary control  
selected programme type.  
7
to confirm the  
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
PTY LANGUAGE  
(only for reception area EUROPE)  
Only possible with activated PTY function: Select a  
language for the display of the programme types.  
Settings: ENGLISH, DEUTSCH (German), FRANCAIS  
(French).  
Turn the rotary control  
tween the settings.  
Press the rotary control  
setting.  
Automatic switching of the display brightness is  
possible only If your car sound system is installed as  
described in the installation instructions and your  
vehicle features the corresponding connection.  
u
u
Press the rotary control  
7
to open the menu.  
Press the rotary control  
tween the languages.  
7
to change be-  
SCROLLING  
u
u
Turn the rotary control  
guage.  
7
to select a lan-  
Select the display of scrolling text (e.g. when dis-  
playing MP3 file names with more than 15 charac-  
ters) either as single display or continued display.  
Settings: 1X (single display), ON (continued display).  
Press the rotary control  
lected language.  
7
to confirm the se-  
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
Turn the rotary control  
tween the settings.  
Press the rotary control  
setting.  
28  
User settings  
LANGUAGE  
(only for Toronto 420 BT)  
TRAFFIC VOL (traffic information volume)  
(reception area EUROPE only)  
Select the language for the display. Settings:  
ENGLISH, DEUTSCH (German).  
Setting the minimum volume for traffic announce-  
ments. Settings: 1 – 50.  
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
u
Press the rotary control  
setting.  
7
to change the  
Turn the rotary control  
tween the settings.  
u
u
Turn the rotary control  
7
to set the volume.  
to confirm the  
Press the rotary control  
setting.  
7
Press the rotary control  
setting.  
HANDSFREE VOL  
(for Toronto 420 BT only and with connected  
cell phone)  
Adjusting the level for handsfree volume. Settings:  
–5 to +5.  
Making settings in the "VOLUME"  
menu  
ON VOLUME  
Setting the power-on volume. Settings: ON VOL-  
UME (power-on volume; 1 – 50) or LAST VOLUME  
(volume set last before switching off the car sound  
system).  
u
u
u
Press the rotary control  
7
7
7
to change the  
to set the level  
to confirm the  
setting.  
Turn the rotary control  
adjustment.  
Press the rotary control  
setting.  
Danger!  
High volume  
BEEP (button beep)  
Switching the confirmation beep on or off.  
Settings: ON, OFF.  
The power-on volume can be unex-  
pectedly high if the LAST VOLUME setting is se-  
lected and a high volume was set the last time the  
radio was switched off.  
Note:  
Always set the device to a moderate volume.  
When storing radio stations,  
a
confirma-  
tion beep sounds even if the OFF setting is  
selected.  
u
u
Press the rotary control  
Turn the rotary control  
the menu items "LAST VOLUME" and "ON  
VOLUME" (power-on volume).  
7
7
to open the menu.  
to switch between  
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
Turn the rotary control  
tween the settings.  
Upon selecting "LAST VOLUME":  
u
Press the rotary control  
setting.  
7
to confirm the  
to change the  
Press the rotary control  
setting.  
Upon selecting "ON VOLUME":  
u
Press the rotary control  
setting.  
7
u
u
Turn the rotary control  
7
to set the volume.  
to confirm the  
Press the rotary control  
setting.  
7
29  
User settings  
Making settings in the "CLOCK" menu Making settings in the "VARIOUS"  
menu  
PERM CLOCK  
Switch the permanent display of the time on or off.  
Settings: ON, OFF.  
DEMO MODE  
Switching the demo mode on or off. Settings:  
ON, OFF.  
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
Turn the rotary control  
tween the settings.  
Turn the rotary control  
tween the settings.  
Press the rotary control  
setting.  
Press the rotary control  
setting.  
If the permanent display of the time is switched  
on, the time is shown on the display. The display  
of the respective audio source is shown only after  
pressing a button. Approximately 15 seconds af-  
ter the button is pressed last, the time is displayed  
again.  
In demo mode, the features of the radio are shown  
as scrolling text on the display.  
MIX AUX  
Switching the combined playback of the AUX  
source with another audio source on or off.  
Settings: ON, OFF.  
HOUR MODE  
Selecting the 12 or 24-hour time. Settings: 12, 24.  
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
Turn the rotary control  
tween the settings.  
Turn the rotary control  
tween the settings.  
Press the rotary control  
setting.  
Press the rotary control  
setting.  
With the AUX MIX ON setting, an audio source  
connected to the front AUX-IN socket is played  
back simultaneously with the respective active  
internal audio source of the car sound system  
(e.g. radio or CD).  
;
SET  
Setting the time.  
u
u
u
u
Press the rotary control  
7
to change the  
setting.  
AUX MIX GAIN (AUX MIX Level)  
Turn the rotary control  
the hours.  
7
clockwise to set  
Adjusting the level of the AUX source with com-  
bined playback of the AUX source and another  
audio source (AUX MIX ON). Settings: –5 to +5.  
Turn the rotary control  
to set the minutes.  
7
counter-clockwise  
to confirm the  
u
u
u
Press the rotary control  
7
7
7
to change the  
to set the level  
to confirm the  
Press the rotary control  
time set.  
7
setting.  
Turn the rotary control  
adjustment.  
Note:  
When you set the time in 12-hour mode  
(HOUR MODE 12), an "AM" is displayed before  
the time for the time before noon or a "PM" for  
the time after noon.  
Press the rotary control  
setting.  
This setting allows raising or lowering the level of  
the AUX source to adjust it to the level of the other  
active audio source.  
30  
User settings | Factory settings  
AUX EDIT  
The car sound system switches off and is  
reset to the factory settings. If a CD has been  
inserted in the CD drive, the car sound system  
automatically switches on again.  
Entry of an individual 15-digit name for the AUX  
source. Possible characters: space, 0 – 9, A – Z.  
u
u
Press the rotary control  
7
to open the menu.  
Press the rotary control  
setting.  
7
to change the  
Factory settings  
Important factory settings in the user menu:  
For each of the 15 characters:  
u
Turn the rotary control  
ter.  
7
to set the charac-  
Menu item  
TUNER AREA  
FM1 / FM2 / FMT  
MW* / LW*  
AM** / AMT**  
RDS  
Factory setting  
EUROPE  
ON  
u
Press the rotary control  
setting.  
7
to confirm the  
You automatically change to the next character  
and finally return to the menu.  
OFF  
OFF  
The name entered is shown on the display as soon  
as you select the AUX source.  
ON  
REGIONAL*  
TRAFFICINFO*  
SENSITIVITY  
PTY  
OFF  
SCAN TIME  
Setting the scan time in seconds. Settings:  
4/8/12/16/60 SEC.  
OFF  
HI  
u
u
u
Press the rotary control  
setting.  
7
7
7
to change the  
to change be-  
to confirm the  
OFF  
Turn the rotary control  
tween the settings.  
ON VOLUME  
TRAFFIC VOL*  
BEEP  
LAST VOLUME  
20  
Press the rotary control  
setting.  
ON  
SCAN TIME  
DIMMER  
8 SEC  
MANUAL  
24  
VERSION  
Displaying the version of the CPU and software  
of the radio.  
HOUR MODE  
CLOCK SET  
u
u
Press the rotary control  
Turn the rotary control  
the display of the version number of CPU (P)  
and software (E).  
7
to open the menu.  
to toggle between  
00:00  
7
*
Only in reception area "EUROPE"  
** Only in reception areas "USA", "SOUTH AMERICA"  
and "THAILAND"  
NORMSET  
In the user menu, you can restore the original  
factory settings of the car sound system (see the  
chapter "User settings", section "Making settings  
in the "VARIOUS" menu", menu item "NORMSET").  
Restoring the original factory settings of the car  
sound system.  
u
Press the rotary control  
7.  
The display shows "PLEASE CONFIRM".  
u
Press the rotary control  
the resetting.  
7
again to confirm  
31  
Useful information | Technical data  
Wavebands in South America:  
Useful information  
FM:  
87.5 – 107.9 MHz  
530 – 1,710 kHz  
Warranty  
AM (MW):  
We provide a manufacturer's warranty for prod-  
ucts bought within the European Union. For de-  
vices purchased outside the European Union, the  
warranty terms issued by our respective responsi-  
ble domestic agency are valid. The warranty terms  
FM frequency response: 30 – 15,000 Hz  
CD  
Frequency range:  
20 – 20,000 Hz  
2 V  
Pre-amp out  
4 channels:  
Service  
In some countries, Blaupunkt offers a repair and  
pick-up service.  
Input sensitivity  
Front AUX-IN:  
300 mV / 10 kΩ  
Information about the availability of this service in  
Dimensions and weight  
W x H x D:  
178 x 50 x 160 mm  
approx. 1.70 kg  
If you want to take advantage of this service, you  
may request a pick-up service for your car sound  
system via the Internet.  
Weight:  
Technical data  
Voltage supply  
Operating voltage:  
10.5 – 14.4 V  
< 10 A  
Current consumption  
In operation:  
10 sec. after switch-off: < 3.5 mA  
Amplifier  
Output power:  
4 x 22 watts sine at  
14.4 V at 4 ohms.  
4 x 50 watts max. power  
Tuner  
Wavebands in Europe/Thailand:  
FM:  
87.5 – 108 MHz  
AM (MW):  
LW (Europe only):  
531 – 1,602 kHz  
153 – 279 kHz  
Wavebands in the US:  
FM:  
87.7 – 107.9 MHz  
530 – 1,710 kHz  
AM (MW):  
Subject to changes  
32  
Installation instructions  
Installation instructions  
Safety instructions  
Supplied mounting hardware  
1 011 202 320 / 1 011 202 420:  
When carrying out installation work and  
making connections please observe the following  
safety instructions:  
Disconnect the negative terminal of the bat-  
tery! When doing so, please observe the vehi-  
cle manufacturer’s safety instructions.  
Make sure you do not damage vehicle compo-  
nents when drilling any holes.  
The cross sections of the positive and negative  
cables must not be less than 1.5 mm².  
Do not connect the vehicles plug connec-  
tors to the radio!  
You can obtain the adapter cable required  
for your vehicle type from any BLAUPUNKT  
dealer.  
1 011 202 321 / 1 011 202 421:  
Depending on the model, your vehicle may  
differ from the description provided here. We  
accept no responsibility for any damages due  
to incorrect installation or connection or for  
any consequential damages.  
If the information provided here is not suita-  
ble for your specific installation requirements,  
please contact your Blaupunkt dealer, your ve-  
hicle manufacturer or our telephone hotline.  
When installing an amplifier, you must first con-  
nect the device earth connections before con-  
necting the plugs for the line-out jacks.  
Earth connection of external devices may not  
be connected to earth of car sound system  
(housing).  
33  
Installation instructions  
1.  
Available as an optional accessory  
12V  
7 607 621 …  
2.  
Installation kits  
7 608 … …  
3.  
0° - 30°  
+/– 10°  
+/– 10°  
34  
Installation instructions  
4.  
6. Removal  
1.  
Antenna  
Antenna  
connection  
2.  
3.  
1.  
2.  
Preamp Out (4x)  
Rear USB  
Microphone In  
(Bluetooth®, Toronto 420 BT only)  
5.  
182  
165  
53  
1-20  
7.  
12V  
35  
Installation instructions  
C-1 C-2 C-3  
1
4
7
10  
13 16  
19  
15 18  
14 17 20  
3
6
9
12  
C
B
A
2
5
8
11  
Aut. antenna / Amplifier +12V  
Remote Control +12V  
*
1
3
4
5
6
7
2
8
10 Ampere  
1
3
4
5
6
7
8
max. 150 mA  
2
A
B
1
2
3
4
5
6
7
8
Sub Out GND  
Radio Mute  
Sub Out  
1
2
3
4
5
6
7
8
Speaker out RR+  
Speaker out RR–  
Speaker out RF+  
Speaker out RF–  
Speaker out LF+  
Speaker out LF–  
Speaker out LR+  
Speaker out LR–  
Permanent +12V  
Aut. antenna +12V *  
Illumination  
Kl.15/Ignition  
Ground  
C1  
NC  
NC  
NC  
NC  
NC  
NC  
C2  
C3  
NC  
NC  
NC  
NC  
NC  
NC  
NC  
NC  
1
2
3
4
5
6
7
8
Telephone AF +  
Telephone AF –  
Radio Mute  
13  
14  
15  
16  
17  
18  
19  
20  
9
10  
11  
12  
Remote Control +12V *  
Remote Control IN  
Remote Control GND  
36  
Installation instructions  
Relais  
+12V  
Sub Out GND Sub Out  
7
5
3
4
1
Kl. 15 +12V  
8
6
2
Radio Mute  
4 Ohm  
4 Ohm  
4 Ohm  
4 Ohm  
+12V  
12V  
Subject to changes!  
37  
Supported iPod/ iPhone devices  
Our product can support below listed iPod/ iPhone generations:  
iPod touch (4th generation)  
iPod touch (3rd generation)  
iPod touch (2nd generation)  
iPod touch (1st generation)  
iPod classic  
iPod with video  
iPod nano (6th generation)  
iPod nano (5th generation)  
iPod nano (4th generation)  
iPod nano (3rd generation)  
iPod nano (2nd generation)  
iPod nano (1st generation)  
iPod  
iPhone 4S  
iPhone 4  
iPhone 3GS  
iPhone 3G  
iPhone  
"Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to  
connect specifically to iPod, iPhone respectively, and has been certified by the developer to meet Apple  
performance standards.  
Apple is not responsible for the operation of this device or its compliance with safety and regulatory  
standards.  
Please note that the use of this accessory with iPod, iPhone may affect wireless performance.  
iPhone, iPod are trademarks of Apple Inc., registered in the U.S. and other countries.  
This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such  
technology outside of this product is prohibited without a license from Microsoft.  
©
2012 All rights reserved by Blaupunkt. This material may be reproduced, copied or distributed for  
personal use only.  
38  
Please keep the filled-in radio pass in a safe place!  
39  
Passport  
Name:  
......................................................................................................................  
1 011 202 _ _ _  
Type:  
......................................................................................................................  
Serial no.:  
BP ...............................................................................................................  
Blaupunkt AudioVision GmbH & Co. KG  
Robert-Bosch-Straße 200  
D-31139 Hildesheim  
01/12  

Arcam DiVA Ampliers P75 Plus User Manual
Audiovox P 15 User Manual
Black Decker BLP7600BF User Manual
Burley CUB User Manual
Crown Boiler PET708 User Manual
Fusion Electronics Car Speaker MS OS420 User Manual
GE 9100170000144 User Manual
Infinity DMC 1000 User Manual
JVC GET0626 002A User Manual
JVC GET0638 002A User Manual