Blaupunkt FREIBURG DJ User Manual

Radio / Cassette  
Freiburg RCM 148  
Siena RCM 148  
Louisiana RCM 148  
Kingston DJ  
St. Louis DJ  
Operating instructions  
Display  
The display consists of three fields and changes according to the operating mode and function.  
Display field 1:  
Display field 2:  
Display field 3:  
Radio mode  
Radio mode  
Displays active functions.  
Memory banks and wavebands  
Brief indication of preset station (e.g. P1)  
Radio frequency or station name  
PTY programme type  
- Stereo  
- Cassette inserted  
- CD changer connected  
LD - Loudness  
Cassette mode  
Cassette mode  
CAS - cassette inserted  
TAPE1/TAPE2 - side of tape being played.  
Displays active function.  
Radio mode  
Changer mode  
Current track  
AF - RDS alternative frequency  
PTY - RDS programme type  
TA - Priority for traffic information  
TP - Traffic programme station  
Changer mode  
CD number being played by changer.  
CD time (elapsed time)  
Brief indication of functional changes  
Audio  
lo  
- Seek tuning sensitivity  
Numeric and graphic representation of the  
volume and audio settings.  
CD changer mode  
DSC  
RPT - Repeat function  
MIX - Titles played at random  
DSC  
Serves as display and entry field during DSC  
programming  
Clock display  
Permanent display for DSC programming.  
Graphic representation of the adjusted vol-  
ume level.  
Miscellaneous  
Indicates new source (e.g. when changing  
from radio to cassette)  
23  
Contents  
Display .......................................... 23  
Quick reference ............................ 25  
Important notes ............................ 28  
Automatically storing the strongest  
Cassette deck operation ............. 37  
stations with Travelstore....................... 32  
Recalling stored stations ...................... 33  
Scanning stations with Radio Scan ...... 33  
Changing the scan time........................ 33  
Selecting the automatic tuning  
sensitivity .............................................. 33  
PTY - Programme Type........................ 33  
Programme types .............................. 33  
Switching PTY ON/OFF .................... 34  
Checking the programme type of the  
station ................................................ 34  
Displaying the selected programme  
type .................................................... 34  
Selecting a programme type ............. 34  
Storing programme types.................. 35  
Scanning stations with PTY SCAN ... 35  
PTY priority........................................ 35  
Cassette playback ................................ 37  
Cassette eject ....................................... 37  
Fast winding.......................................... 37  
Reversing the tape ............................... 37  
Traffic information during  
What you need to know ........................ 28  
Traffic safety ......................................... 28  
Installation............................................. 28  
Warning note ........................................ 28  
cassette playback ................................. 37  
CD changer operation.................. 38  
Switching to the CD changer mode...... 38  
Inserting a CD ....................................... 38  
Ejecting a CD ........................................ 38  
CD playback ......................................... 38  
Selecting a CD ...................................... 38  
Selecting a title ..................................... 39  
SCAN .................................................... 39  
RPT ....................................................... 39  
MIX....................................................... 39  
Clock ............................................. 29  
Setting the clock ................................... 29  
Release panel ....................................... 29  
Theft protection..................................... 29  
Fixing the release panel ....................... 30  
Selecting the audio mode ........... 30  
Radio operation with RDS ........... 31  
AF - Alternative frequency .................... 31  
REG - regional programme .................. 31  
Selecting a waveband .......................... 31  
DSC programming ....................... 40  
Traffic programme station  
reception with RDS-EON ............. 36  
Overview of the DSC factory  
settings.................................................. 41  
Station tuning ........................................ 31 Traffic announcement priority on/off .... 36  
Automatic seek tuning .............. 31 Warning beep ....................................... 36  
/
Appendix ....................................... 42  
Manual tuning with << >>.................. 32  
Scrolling through the broadcasting  
Switching the warning beep off ......... 36  
Automatic seek tuning start  
Specifications........................................ 42  
networks (FM only) ............................... 32 (Cassette and CD changer operation) . 36  
Switching between the memory banks  
Adjusting the volume for traffic  
(FM) ...................................................... 32 announcements and the warning beep .. 37  
Storing stations ..................................... 32  
24  
Quick reference  
3 Volume knob  
9 Rocker switch  
1 REL  
Turn the knob to set the volume.  
To release the detachable panel (theft  
protection).  
Press this knob and remove the  
release panel.  
4
Eject  
Press this button to eject the cassette.  
5 Cassette slot  
2 ON - Power up/down  
Insert the tape into the slot with the  
open side showing to the right. The  
tape will be played in the direction pre-  
viously selected.  
Press this button to turn the equipment  
on. It will play at the preset volume. If  
you press this button briefly during ra-  
dio reception, the volume will turn  
down instantly (MUTE).  
This function is cancelled by pressing  
the ON button again. You can pro-  
gramme the mute volume (refer to  
“DSC programming”).  
Radio mode  
/
Seek tuning  
Up  
Down  
<</>> Up/down in short intervals  
(on FM only if „AF“ is off)  
6 Display  
Displays all settings, operating modes  
and functions.  
For FM only:  
<</>> Scrolling through the broadcasting  
networks, if AF is on. Example:  
NDR 1, 2, 4, N-Joy, FFN ...  
7 FR Fast Rewind  
Press the button for about 2 seconds  
to turn the unit off.  
To fast rewind the tape.  
8 FF Fast Forward  
Switching on/off via the ignition:  
If the set has been connected corre-  
spondingly, it can also be turned on  
and off with the vehicle ignition.  
Press the ON button to keep on oper-  
ating the set when the ignition is  
switched off.  
Changer mode  
To fast forward the tape.  
Optional:  
Freiburg RCM 148, Siena RCM 148,  
Louisiana RCM 148  
7 + 8 Reversing the tape (PROG)  
Press both buttons simultaneously.  
Included:  
Kingston DJ, St. Louis DJ  
The set will switch on. To avoid that  
the battery goes flat, the system will be  
turned off automatically after one hour  
of playback.  
Select CD  
Up  
Down  
25  
Select title  
Up: press briefly  
Radio mode  
Press AF·TA briefly: TA off.  
“TP” will be displayed when a traffic  
programme is played.  
Press SRC/SC longer.  
CUE - fast forward (audible): hold  
button down.  
The radio will scan all receivable FM  
stations. “SCAN” and the station name  
appear on the display one after anoth-  
er.  
AF on/off:  
Press AF·TA longer: a beep will be  
emitted; “AF” appears.  
Press AF·TA longer: a beep will be  
emitted; “AF” disappears.  
Down: press two or more times  
briefly  
Repeat title: press briefly.  
REVIEW - fast reverse (audible):  
hold button down.  
PTY Scan  
PTY Scan can be started if PTY is on  
(“PTY” will be displayed).  
The radio will scan all stations broad-  
casting the selected programme type.  
< PTY (Programme Type)  
Extra function of rocker switch:  
For additional settings use  
You can select among various pro-  
gramme types. Using the rocker switch  
<< >> it is possible to recall all PTY  
programme types, if PTY is activated  
(“PTY” lights up in the display).  
AUD  
DSC-MODE  
PTY  
F
E
<
Changer mode  
Press SRC/SC longer.  
“SCAN” will be displayed.  
To stop CD Scan: Press SRC/SC  
again.  
Requirement: The respective function  
is activated.  
= BA/TS  
Switches between the wavebands/  
memory banks FM1, FM2, FMT  
(Travelstore), MW and LW (Freiburg  
RCM 148, Kingston DJ without MW,  
LW).  
: SRC/SC  
(SRC = audio source, SC = scan)  
Press button briefly to select the oper-  
ating mode (tuner, cassette, changer).  
The active mode appears in the dis-  
play.  
Press SRC/SC longer to select the  
SCAN function (samples radio stations  
and titles).  
; AF·TA  
Alternative Frequency in RDS mode:  
TA (Traffic Announcement = priority  
for traffic programs)  
If “AF” is displayed, the radio will auto-  
matically search for a radio frequency  
offering the same programme in a bet-  
ter quality (using RDS).  
Extra function: Travelstore  
To store the six most powerful radio  
stations in the Travelstore bank:  
Press BA/TS until a beep sounds and  
“T-STORE” appears.  
Use DSC programming to set the scan  
time.  
TA on/off:  
Press AF·TA briefly: “TA” will be dis-  
played, priority for traffic programs ac-  
tivated.  
26  
>...C - Preset buttons 1 to 6  
5/MIX  
E DSC Direct Software Control  
Adjusts programmable basic settings.  
Refer to “DSC programming”.  
“MIX CD” plays the titles of one CD in  
random order.  
Radio mode  
You can store six stations in each  
memory bank (1, 2, and “T”).  
On MW and LW you can store six sta-  
tions each (except for Freiburg RCM  
148, Kingston DJ).  
Store station - hold down a preset  
button in radio mode until a beep is  
emitted.  
Recall station - select a waveband  
and also the memory bank on FM;  
press the relevant preset button briefly.  
The selected preset button will briefly  
appear in display field 1 (e.g. P1).  
“MIX ALL” plays the titles of all CDs of  
one changer magazine in random or-  
der.  
To turn MIX on/off:  
Press 5/MIX briefly.  
The current setting is briefly indicated  
in the display: “MIX-CD”.  
Switch MIX-ALL on:  
F AUD  
Default settings for treble and bass  
You can store different settings for the  
FM, MW, LW, cassette and CD mode  
(Freiburg RCM 148, Kingston DJ with-  
out MW, LW).  
Setting the tone:  
Hold 5/MIX down until a beep is  
Select the audio mode. Press AUD  
once and set the tone using the rocker  
switch.  
emitted.  
D
DIS - clock display  
Treble:  
Treble +  
Treble –  
Radio mode  
Press this button briefly and the time  
will be displayed for a while.  
Changer mode  
Bass:  
Bass –  
Bass +  
3/ - Pause  
Interrupts CD play. “PAUSE” appears.  
Press button again to restart CD play.  
Changer mode  
Press this button to switch the display  
between CD number and CD time indi-  
cation.  
Press AUD twice and set the fader  
using the rocker switch.  
4/RPT  
Repeat title: press 4/RPT. “REPEAT-T”  
appears briefly. The title will be repeat-  
ed until 4/RPT is pressed again.  
Repeat CD: select “REPEAT-D”.  
Switch REPEAT-D on:  
Fader front  
Fader rear  
Balance left  
Balance right  
Cassette mode  
Press this button to switch the display  
between the cassette direction and  
clock indication.  
The selected values will appear in the  
display. The last setting is stored auto-  
matically.  
Hold 4/RPT down until a beep is  
emitted.  
27  
Important notes  
Switching AUD off  
Press button briefly.  
If you do not change the tone within  
8 sec., the AUD mode will quit auto-  
matically.  
Installation  
What you need to know  
If you would like to install your new car ster-  
eo yourself or add other audio components  
to existing ones, then please read the en-  
closed instructions on installation and con-  
nection carefully.  
In order to ensure that the set operates prop-  
erly the positive power supply line must be  
connected via the ignition and the perma-  
nent +12 V lead.  
Before using your new car radio, please read  
through the following information carefully.  
Traffic safety  
Extra function: LD  
Loudness boosts the bass frequency  
at low volume.  
Press AUD longer than 2 seconds to  
change the Loudness setting. “LD” will  
appear.  
As the driver of a motor vehicle, it is your  
responsibility to pay attention to the traffic  
situation at all times.  
Never use your car radio in a way that could  
distract you.  
Please keep in mind that you travel a dis-  
tance of 14 m per second at a speed of only  
50 km/h.  
Do not ground the loudspeaker outputs!  
Should the traffic situation become particu-  
larly demanding, we advise you not to use  
the radio.  
Always make sure that you are still able to  
hear any warning signals coming from out-  
side the vehicle, such as police or fire en-  
gine sirens, so that you can react accord-  
ingly.  
Warning note  
Danger of damaging the automatic  
power antenna in a car wash  
Before you drive into a car wash  
switch the radio off by pressing the ON  
button.  
The power antenna will retract, if it  
doesn’t, press ON again.  
Consequently, you should always select a  
moderate volume for playing your car radio  
while you are driving.  
Do not drive into the car wash unless the  
power antenna has retracted!  
28  
Clock  
Release panel  
If the set was still in operation, it will turn off  
now. All current settings remain stored. If a  
cassette is inserted, it will be kept in the set.  
The radio will turn on automatically when  
you attach the release panel again.  
This car radio is equipped with a built-in  
clock.  
Theft protection  
This unit is equipped with a detachable con-  
trol panel. A car radio without control panel  
is worthless for thieves.  
Display priority:  
To switch the display priority, press the  
button until you hear a beep. Press as many  
times until the desired display mode is ac-  
tive (not during radio reception).  
Protect your car radio and detach the con-  
trol panel when you leave your car. It is very  
easy to attach and detach the release pan-  
el thanks to its specific design.  
Attaching the release panel  
Slide the panel (B) from the left to the guide  
of the chassis (A). Gently push the left side  
of the panel against the front of the chassis  
until it snaps into place.  
Radio mode  
Press the  
clock.  
button briefly to display the  
Note:  
Cassette mode  
Do not pull the release panel straight out  
from the chassis, but detach it as illustrated  
below. Be sure not to drop the panel.  
Do not expose the release panel to direct  
sunlight or other heat sources.  
Do not leave it in a humid place.  
Press this button to switch the display be-  
tween the cassette direction and clock indi-  
cation.  
Changer mode  
Press the button briefly to switch the dis-  
play between the CD number, playback time  
and clock indication.  
Detaching the release panel  
Press the REL button to release the control  
panel. Then pull it off gently as illustrated.  
Setting the clock  
Press DSC briefly.  
Press to selection the “CLOCK-  
/
SET” function.  
Press << >> to set the hours or min-  
utes. The adjustable option will flash in  
the display.  
Press  
/
to adjust the flashing value.  
After you have set the clock, press  
DSC briefly to store the new setting.  
29  
Selecting the audio mode  
Fixing the release panel  
Use the SRC/SC (source) button to select  
between radio, cassette and CD mode.  
If you wish to fix the release panel perma-  
nently to the chassis, screw down the en-  
closed bolt at the left hand side of the chas-  
sis into the hole (C), see Fig.  
The CD mode is not available unless a CD  
changer is connected.  
To select the operating mode:  
Press SRC/SC.  
C
30  
Radio operation with RDS (Radio Data System)  
The Radio Data System will enhance your If “SEARCH” appears in the display when  
enjoyment when you listen to FM radio sta- the radio is switched on or one of the stored  
Selecting a waveband  
With this car radio you can select between  
the following wavebands:  
tions.  
frequencies recalled, the unit is already au-  
More and more radio stations broadcast tomatically searching for an alternative fre-  
RDS information along with their regular quency.  
FM87,5 - 108 MHz  
MW 531 - 1602 kHz  
LW153 - 279 kHz  
(Freiburg RCM 148, Kingston DJ without  
MW, LW).  
programming.  
“SEARCH” will disappear from the display  
As soon as a programme has been identi- when the alternative frequency has been  
fied, the station name including a regional found or after the frequency band has run  
identifier, if applicable, will appear in the dis- through completely.  
Select the desired waveband by press-  
ing the BA/TS button.  
play, for example, NDR1 NDS (regional pro-  
gramme in Lower Saxony, Germany).  
When RDS is activated, the preset buttons  
become programme buttons. You now know  
exactly which programme you have tuned  
into, making it easy to find the desired sta-  
tion quickly.  
If the reception quality of the selected pro-  
gramme deteriorates beyond a certain point:  
Tune into another station.  
Station tuning  
Automatic seek tuning  
/
REG - regional programme  
Press  
cally search for the next station.  
If you hold pressed up or down on the  
/
; the car radio will automati-  
Certain radio programmes are split up at  
times into regional programmes offering lo-  
cal information. The 1st programme broad-  
cast by NDR, for example, offers pro-  
grammes with different contents in the north-  
ern German states of Schleswig-Holstein,  
Hamburg and Lower Saxony at certain times  
of the day.  
But RDS offers you further advantages:  
/
rocker switch, seek tuning will speed up in  
the upwards or downwards direction.  
AF - Alternative frequency  
The AF (Alternative Frequency) function  
makes sure that the radio always tunes into  
the strongest frequency of the currently se-  
lected programme automatically.  
If you are listening to a particular regional  
programme and wish to continue doing so,  
select “REG ON” in the DSC mode.  
This function is activated when “AF” appears  
in the display.  
In order to switch this function on or off,  
Automatic seek tuning  
If you leave the service area of the regional  
programme you are tuned into, or if you  
would like to take advantage of full RDS  
service, switch to “REG OFF” in the DSC  
mode.  
press the AF·TA button until a beep is  
emitted.  
Up  
Down  
<< / >> Up/down in short intervals  
(on FM only if “AF” is switched off)  
While searching for the strongest reception  
signal, the radio may switch to mute briefly.  
31  
To do this, you can start the Travelstore seek  
operation:  
Select the appropriate waveband by  
pressing BA/TS.  
Manual tuning with << >>  
You can also tune into a station manually.  
Press BA/TS for 2 seconds; the sys-  
tem will start to run through the fre-  
quency band.  
Tune in a station with the rocker switch  
Requirement:  
AF and PTY must be switched off (i.e. the  
symbols do not light up in the display).  
(either automatically  
<< >>).  
/
or manually  
If “AF” is not lit up,  
Press the desired preset button until  
the radio resumes play after the mut-  
ing (takes approximately 2 seconds,  
confirmed by a beep).  
If necessary, deactivate these functions:  
Hold AF·TA down. A beep sounds and  
Press AF·TA or PTY.  
“AF” appears.  
Manual tuning:  
This fulfils the requirements for selecting  
stations with << >>.  
Now the station has been stored.  
The display will indicate which preset but-  
ton is currently activated.  
Press << >>; the frequency will change  
in short intervals in the downwards or  
upwards direction.  
Switching between the memory  
If you hold << >> pressed to the left or the  
right on the rocker switch, the frequency  
scan will speed up.  
banks (FM)  
You can switch between the memory banks  
1, 2 and T in order to store stations and re-  
call them later.  
The currently selected memory bank ap-  
pears in the display.  
Automatically storing the  
strongest stations with Travel-  
store  
Scrolling through the broadcast-  
ing networks (FM only)  
You can automatically store the six most  
powerful FM stations in your current recep-  
tion area sorted according to their signal  
strength. This function is particularly conven-  
ient on longer trips.  
Press the BA/TS button as many times  
as necessary until the desired memory  
bank lights up in the display.  
You can use the << >> buttons to tune into  
stations in your reception area.  
If it is possible to receive several pro-  
grammes in the same broadcasting network,  
you can scroll through them in the forwards  
direction by pressing >>, or backwards  
using the << button, e.g. NDR 1, 2, 3, 4,  
N-JOY, ...  
For this to work properly you must have al-  
ready tuned into the stations at least once  
and “AF” must be active (lights up in the dis-  
play).  
Press the BA/TS button for 2 seconds.  
Storing stations  
“T-STORE” will appear in the display.  
On FM, you can store six stations on the  
preset buttons 1, 2, 3, 4, 5, 6 for each of the  
memory banks (1, 2, T).  
On MW/LW, you can also store six stations  
each (Freiburg RCM 148, Kingston DJ with-  
out MW, LW).  
32  
The six strongest FM stations will be auto- During the actual scanning process “SCAN”  
matically stored on the memory bank “T” will appear in the display.  
PTY - Programme Type  
PTY is an RDS service offered by an in-  
creasing number of broadcasting stations.  
This feature allows you to select FM stations  
according to their programme type.  
After you have chosen the PTY of your pref-  
erence, the corresponding stations can be  
selected either by seek tuning or using the  
scan function.  
(Travelstore). When this process has been  
completed, the radio will play the strongest  
station.  
If desired, stations can also be stored man-  
ually in the Travelstore bank (see “Storing  
stations”).  
To select a scanned station and switch  
off the Scan function:  
Press SRC/SC briefly.  
If no station is selected, scan will start again.  
Changing the scan time  
Recalling stored stations  
The scan time can be selected from between  
5 to a maximum of 20 seconds.  
If you would like to alter the scan time,  
please refer to the section on “DSC program-  
ming - SCANTIME”.  
Programme types  
You can recall any stored station at the touch  
of a button.  
Turn PTY on.  
Select the waveband by pressing  
BA/TS. For FM, also choose the corre-  
sponding memory bank by pressing  
the BA/TS button as many times as  
necessary until the desired bank ap-  
pears in the display.  
Use << >> to have the last selected pro-  
gramme type displayed and to choose a new  
one.  
You can select any one of the stored types  
with the preset buttons 1-6.  
Selecting the automatic tuning  
sensitivity  
The following list indicates some of the pro-  
gramme types which are available.  
You can alter the automatic tuning sensitiv-  
ity.  
Press the corresponding preset button  
briefly to recall the station.  
If “lo” is displayed, the radio will only pick up  
strong, local stations (low sensitivity).  
If “lo” does not light up, the radio will also  
pick up weaker, more distant stations (high  
sensitivity).  
WEATHER  
FINANCE  
TRAVEL  
HOBBIES  
JAZZ  
Scanning stations with  
Radio Scan  
You can scan through all of the stations in If you would like to alter the sensitivity level  
your reception area.  
To start the Scan function:  
please refer to the section on “DSC program-  
ming – SENS”.  
COUNTRY  
NEWS  
Press SRC/SC longer.  
INFO  
The scanned frequency or the station name  
will start flashing in the display.  
SPORT  
33  
CULTURE  
SCIENCE  
b) Using the << >> buttons on the rocker  
switch  
Displaying the selected programme  
type  
When PTY is switched on, you can  
select a programme type using buttons  
<< >>.  
VARIED  
Press << or >>.  
The programme type selected last will be  
displayed briefly.  
POP MUSIC  
ROCK MUSIC  
CLASSICS  
Press << or >>; the programme  
type selected last will be displayed  
for 3 seconds.  
Selecting a programme type  
a) Using the preset buttons  
Switching PTY ON/OFF  
During this period press >> (for-  
wards) or << (backwards) to select  
the desired type.  
When PTY is switched on, you can use  
the preset buttons 1-6 to select the  
programme types stored at the factory.  
Press PTY.  
When the function is active, the programme  
type selected last will briefly appear in the  
display. “PTY” will appear permanently.  
Press << or >> as many times as  
required.  
Press one of the presets 1-6.  
The selected programme type will be  
displayed for 2 seconds.  
If you would like to listen to a station  
with the selected PTY,  
Checking the programme type of the  
station  
If you would like to listen to a station  
with this PTY,  
press  
/
to start the seek tuning  
function.  
Press PTY for approximately 2 sec-  
press  
/
to start the seek tuning  
If the radio is unable to find a station offer-  
ing the selected programme type, the dis-  
play will show “NO PTY” and a beep tone  
will be emitted. The radio will select the sta-  
tion which was tuned into before seek tun-  
ing was activated.  
onds.  
function.  
After the beep tone the display will show the  
programme type offered by the tuned in sta-  
tion. If “NONE” appears in the display, the  
current station has no PTY code.  
If the radio is unable to find a station offer-  
ing the selected programme type, the dis-  
play will show “NO PTY” and a beep tone  
will be emitted. The radio will select the sta-  
tion which was tuned into before seek tun-  
ing was activated.  
You can assign different programme types  
to each preset position. Please refer to the  
next section on “Storing programme types”.  
34  
During cassette or CD operation, the set will  
also switch to the programme offering the  
selected PTY within the broadcasting net-  
work.  
After the PTY programme has ended the  
system will switch back to the previous mode  
(radio, cassette or CD).  
Storing programme types  
PTY priority  
Each of the preset buttons 1-6 has been Situation:  
assigned one programme type at the facto-  
PTY is switched on and lights up in the dis-  
ry.  
play.  
If desired, you can also replace these with  
other available programme types.  
To do so, make sure that “PTY” lights up in  
the display.  
No station offering the selected programme  
type can be found currently in your recep-  
tion range (with seek tuning or scan).  
The set will switch back to the station previ-  
ously tuned into.  
As soon as it is possible to receive a pro-  
gramme in the broadcasting network with  
the PTY selected, the radio will switch over  
to the corresponding station for the dura-  
tion of the programme.  
Note:  
If necessary, press the PTY button to  
switch on the function.  
As already mentioned, these functions are  
only supported by a limited number of RDS  
stations at the present time.  
Select a programme type using but-  
tons << >> and  
hold down the desired preset button  
(1-6) until you hear a beep.  
Example:  
German broadcasting network NDR:  
Now the selected programme type can be  
recalled by pressing this preset, if “PTY”  
lights up in the display.  
-
-
-
-
-
Station playing: NDR3.  
“PTY” lights up in the display.  
Programme type “POP” selected.  
Seek tuning is started.  
Scanning stations with PTY SCAN  
Requirement: “PTY” must appear in the dis-  
play.  
No station with “PTY-POP” can be  
found.  
Press the SRC/SC button until you  
hear a beep.  
-
-
-
-
The display shows “NO PTY” and  
automatically switches back to NDR3.  
NDR2 airs a “PTY-POP” programme.  
All of the stations in your current re-  
ception area offering the selected pro-  
gramme type will be scanned.  
To switch off PTY-SCAN:  
The radio will switch to the linked sta-  
tion NDR2 for the duration of the  
“POP” programme.  
Press SRC/SC or the seek-tuning  
rocker switch once again.  
35  
Traffic programme station reception with RDS-EON  
The abbreviation “EON” stands for En-  
hanced Other Networks, which means that  
information is exchanged within a radio net-  
work.  
Many FM radio stations provide their serv-  
ice area with traffic messages at regular in-  
tervals.  
Along with their programmes, all traffic pro-  
gramme stations transmit a special carrier  
signal, which is decoded by your car radio.  
If this signal is identified, “TP” will appear in  
the display (Traffic Programme).  
In addition to these, there are also stations  
which do not actually transmit traffic infor-  
mation themselves, but by using RDS-EON  
it is possible for them to forward the traffic  
messages broadcast by another traffic  
programme station in the same radio net-  
work.  
If you want to have the priority for traffic  
announcements activated while listening to  
one of these stations (e.g. NDR4), “TA” must  
appear on the display panel.  
If a traffic announcement is broadcast, the  
radio will automatically switch to the linked  
traffic programme station (in this case,  
NDR2) for the duration of the message and  
return to the original programme (NDR4)  
afterwards.  
Traffic announcement priority  
on/off  
Switching the warning beep off  
a) Tune into another station offering traf-  
fic information:  
If the priority for traffic announcement pro-  
grammes is activated, “TA” will light up in  
the display.  
Press the rocker switch or  
press a preset button which has a  
traffic programme station allocated  
to it.  
To switch the priority on or off:  
Press the AF·TA button. “TA” appears.  
Alternatively:  
If you press AF·TA while a message is be-  
ing broadcast, this message will be inter-  
rupted. The unit will then switch back to the  
previous mode. The priority for other traffic  
messages remains active.  
Please note that several buttons have no  
function while a traffic announcement is  
broadcast.  
b) Switch off the priority for traffic an-  
nouncements:  
Press TA.  
“TA” will disappear from the dis-  
play.  
Automatic seek tuning start  
(Cassette and CD changer operation)  
Warning beep  
If you leave the reception area for the traffic  
programme station you have tuned into  
while you are listening to a cassette or CD,  
the system will automatically start search-  
ing for a new traffic programme.  
If no such station is found within approxi-  
mately 30 seconds, a warning beep will  
sound every 30 seconds. To switch the  
warning beep off, proceed as described  
above.  
If you leave the reception area of the traffic  
programme station currently tuned into, you  
will hear a warning beep after approximate-  
ly 30 seconds.  
This alarm tone will also be emitted if you  
press a preset button for a station which  
does not send the traffic programme signal  
(TP).  
36  
Cassette deck operation  
Adjusting the volume for traffic  
announcements and the warning  
beep  
Reversing the tape  
Cassette playback  
To change the tape direction during cassette  
playback:  
Insert the tape into the slot with the open  
side showing to the right.  
Press SRC/SC to select the tape deck mode.  
“TAPE 1” or “TAPE 2” will appear. The tape  
will be played in the direction previously  
selected.  
Press FR/FF simultaneously.  
Although this volume was preset at the fac-  
tory, you can use the DSC function to alter  
the setting (see “DSC programming - TA  
VOL”).  
The display shows “TAPE 1” or “TAPE 2”  
for the selected tape side.  
Traffic information during  
cassette playback  
Cassette eject  
Press to eject the cassette.  
The Traffic Announcement function (priori-  
ty for traffic programmes) makes it possible  
to receive traffic information during cassette  
playback. If a traffic message is broadcast,  
cassette playback will stop and the message  
reproduced.  
Fast winding  
Press the FF or FR button to fast forward  
(FF) or fast rewind (FR) the tape during cas-  
sette operation: “FORWARD” or “REWIND”  
lights up in the display.  
This function is active, if “TA” lights up in  
the display.  
When the end of the tape is reached with  
fast winding, the tape direction will change  
and the other side of the tape will be played.  
With “Radio Monitor ON” during fast wind-  
ing you can listen to the radio programme  
previously selected. It is possible to change  
the Radio Monitor setting in the DSC mode.  
(Refer to “DSC programming - RM”).  
Press the AF·TA button briefly to acti-  
vate TA.  
37  
CD changer operation  
Optional:  
Switching to the CD changer  
mode  
Selecting a CD  
Freiburg RCM 148, Siena RCM 148,  
Louisiana RCM 148  
When CD playback starts, all active CD func-  
tions and the CD number light up in the dis-  
play.  
To change the display between CD number  
and elapsed time indication, press  
ing CD playback.  
Make sure that at least one CD has been  
inserted into the magazine.  
Included in delivery:  
Kingston DJ, St. Louis DJ  
Press SRC/SC to change the audio source:  
This piece of equipment offers you  
convenient control of a Blaupunkt CD  
changer CDC-A 08/CDC-A 072.  
dur-  
Press SRC/SC repeatedly until the CD  
functions appear in the display.  
Inserting a CD  
sym-  
If the CD changer is connected, the  
bol lights up in the display.  
Insert one or several CDs into the maga-  
zine (printed surface facing up).  
Slide the magazine into the CD changer in  
the direction of the arrow.  
The changer is equipped with a magazine  
for 10 discs.  
/
CD selection  
Up  
Note:  
Down  
The CDs are counted from bottom to top.  
Use only perfectly circular CDs with a diam-  
eter of 12 cm.  
CDs with a diameter of 8 cm or CDs manu-  
factured in the shape of a mug, for exam-  
ple, are not suitable for use with this equip-  
ment.  
The CD number being played appears  
in the display.  
Ejecting a CD  
Open the door of the CD changer and press  
the eject button.  
Using such CDs can very likely result in the  
destruction of the CD and the CD drive.  
We assume no responsibility for damages  
caused by using unsuitable CDs.  
After you have inserted the magazine, keep  
the door of the magazine closed to prevent  
contamination.  
CD playback  
Press SRC/SC to select the CD changer.  
Press SRC/SC repeatedly until  
“CHANGER” appears in the display.  
CD playback starts with the first CD identi-  
fied by the changer.  
38  
To stop the Scan function:  
Press SRC/SC briefly.  
Selecting a title  
MIX  
You can have the CD titles played in ran-  
dom order.  
The track currently scanned will continue to  
play.  
The following options are possible:  
The SCAN function will also be cancelled  
by pressing any other button, except for the  
volume controls and the AUD and ON but-  
tons.  
-
-
Mix all titles of one CD (“MIX-CD”) or  
Mix all titles of all CDs (“MIX-ALL”).  
“MIX” appears in display field 3 as long as  
the MIX function is active.  
“MIX-CD” or “MIX-ALL” lights up briefly in  
display field 2 when you activate this func-  
tion and each time the title changes.  
Up: Press briefly.  
CUE - fast advance (audible):  
Hold button down.  
RPT  
Down: Press two or more times briefly.  
To re-start a title: Press briefly.  
REVIEW - fast reverse (audible):  
Hold button down.  
CD titles can be played repeatedly.  
The following options are possible:  
Switch MIX-CD on:  
Press 5/MIX briefly.  
-
-
Repeat the current title (“REPEAT-T”) or  
Repeat the CD, i.e. all titles of the cur-  
rent disc (“REPEAT-D”).  
Press the button repeatedly to skip several  
titles.  
The number of the selected title appears  
beside “T” (track).  
Switch MIX-ALL on:  
Hold 5/MIX down until a beep is emit-  
“RPT” appears in display field 3 as long as  
RPT is active.  
ted.  
“REPEAT-T” or “REPEAT-D” lights up briefly  
in display field 2 when you activate this func-  
tion and each time the title changes.  
SCAN  
Use this function to scan all of the CD tracks.  
Switch REPEAT-T on:  
To start the Scan function:  
Press 4/RPT briefly.  
Hold down SRC/SC until “SCAN” ap-  
pears.  
Switch REPEAT-D on:  
All titles of the CD will be scanned one after  
the other in ascending order.  
Hold 4/RPT down until a beep is emit-  
ted.  
39  
DSC programming  
The car radio has been equipped with DSC LOUDNESS Loudness boosts the bass  
CLOCK 24 To switch between 12-h and  
(Direct Software Control) to allow you to  
customise certain programmable, basic set-  
tings to suit your personal needs and pref-  
erences and then store them.  
frequencies at low volume.  
LOUD 1 - Low boost  
LOUD 6 - Max. boost  
24-h clock display.  
CLOCKSET To set the clock manually.  
Press << >> to select hours/  
The basic settings for this audio equipment TA VOL  
were made at the factory.  
The traffic announcement  
and warning beep volume  
can be set between 0 to 66.  
The message will then come  
through at this volume, if the  
standard volume is lower.  
If the standard volume is set  
higher than the TA VOL lev-  
el, then the traffic report will  
be played at the standard  
volume.  
minutes. Press  
the flashing value.  
/
to adjust  
In the following you can find an overview of  
these settings, so that you can always reset  
to them if desired.  
ON VOL  
To set the turn-on volume.  
Press << >> to adjust the  
turn-on volume as desired.  
If you wish to alter any of the programming,  
press DSC.  
“MENU  
Use the  
/
” will light up in the display.  
buttons of the rocker switch to  
MUTE  
To change the mute volume.  
/
select the function you wish to change. The  
display will show you the setting you have  
selected. Press the << >> buttons of the  
rocker switch to change the values. Confirm  
the setting you have selected by pressing  
the DSC button.  
BEEP X  
To change the volume of the  
acknowledgement tone  
(beep) between 0 and 9.  
(0 = off)  
REG  
Regional function on/off.  
SENS DX1 To adjust the seek tuning  
sensitivity.  
RM OFF  
Radio Monitor  
“LO” stands for local recep-  
tion.  
“DX” stands for distant re-  
ception.  
Select “LO 3” if you want to  
receive strong stations in  
the local area, select “DX 1”  
if you want to tune into  
weaker stations which are  
further away.  
If the Radio Monitor function  
is active during fast winding  
of the tape, the set will  
switch to the radio and play  
the station previously re-  
ceived.  
/
Select function  
<< >>  
Adjust/recall value  
40  
SCANTIME Use this function to set the  
scan time for the radio or  
CD player from 5 to 20 sec-  
onds.  
Overview of the DSC factory  
settings  
LOUDNESS  
TA VOL  
REG  
3
40  
OFF  
AUX  
Select AUX ON if you wish  
to connect a Discman or  
Walkman instead of the CD  
changer. Contact your deal-  
er for more information.  
SENS  
DX1  
CLOCKTYPE  
CLOCKSET  
ON VOL  
MUTE  
CLOCK 24  
20  
10  
BEEP  
RM  
3
DISPLAY  
ON/OFF  
OFF  
10 sec.  
OFF  
OFF  
SCANTIME  
AUX  
DIS  
Display indications on or off  
with the car radio turned off.  
41  
Appendix  
CD player  
Specifications  
Optional:  
Amplifier  
Freiburg RCM 148, Siena RCM 148,  
Louisiana RCM 148  
Output power:  
4 x 23 W RMS power  
acc. to DIN 45324 at  
14.4 V  
Included:  
Kingston DJ, St. Louis DJ  
4 x 35 W max. power  
Tuner  
Frequency response:  
20 - 20 000 Hz  
Wavebands:  
FM  
MW  
LW  
87.5 – 108 MHz  
531 – 1602 kHz  
153 – 279 kHz  
(Freiburg RCM 148, Kingston DJ without  
ML, LW).  
FM frequency response:  
35 - 16 000 Hz  
Cassette  
Frequency response:  
35 - 16 000 Hz  
Subject to modifications!  
42  
Blaupunkt-Werke GmbH  
Bosch Gruppe  
3/98 Mg  
K7/VKD 8 622 401 520  

Bazooka CSA50 4 User Manual
Black Decker BLP14750TDC User Manual
Burnham PVG User Manual
Canon DC 100 User Manual
Canon DC311 User Manual
Canon PowerShot 510 HS 12 1 Megapixel Compact Camera 5688B001 User Manual
Casio FX 991WA User Manual
Elinchrom RQ RINGFLASH ECO 20492 User Manual
FujiFilm 16227480 User Manual
iOptron Camcorder Accessories 8602 User Manual