Eclipse Fujitsu Ten CD5100 User Manual

㪜㪄㫀㪪㪜㪩㪭㩷㪦㫇㪼㫉㪸㫋㫀㫆㫅㩷㪞㫌㫀㪻㪼  
CD5100  
We appreciate your purchase of  
this head unit. Please read through  
this manual in order to ensure correct operation.  
We suggest that after reading it  
you keep this manual in a safe  
place for future reference.  
Automatically generated filename  
File extension  
XXXXXXXX.twn  
XXXXXXXX.ast  
File extension  
• Disc formats that may be used are as follows:  
• CD-ROM (MODE1)  
• CD-ROM (MODE2_FORM1)  
* NOTE: CD-ROMs written in MODE2_FORM2 cannot be read.  
• NOTE: The le names can be changed within 8 alphanumeric characters (space cannot  
be used.)  
• One each of Route Assist le and Town Map le can be stored in the unit. When other les  
are loaded into the unit, the le previously stored in the unit is overwritten.  
Area Shot Screen Conguration  
The following two functions can be displayed in the Area Shot mode.  
Route Assist mode : Displays the guidance by setting starting point and destination.  
Town Map mode  
: Displays the surrounding of self-chosen area such as a sightseeing spot.  
Route Assist mode  
• Guidance point map : Displays a map which is centered and locked on the current Guidance  
Point.  
• Route map : Displays a map showing the route between Guidance Points.  
1
2
Text information :  
Information pertaining to the Guidance Points (heading, street names) is displayed as text.  
Route :  
The physical route to the destination point is displayed in purple.  
Distance remaining :  
3
If an optional GPS unit is not connected, this indicates the distance between intersections.  
When an optional GPS unit is connected, this area indicates the distance from the current  
vehicle position to the next intersection (accuracy of the distance displayed may vary  
depending on the quality of GPS unit/reception)  
Manually selection icons*1*2 :  
4
5
When this icon is visible, the user can cycle forwards/backwards through Guidance Points  
using the [SELECT] (Upper/Lower) button.  
Scale (Guidance point map only) :  
Shows the current reduction scale of the map shown.  
Route Number  
6
7
Current Position*1:  
If an optional GPS unit is connected, your vehicle position will be indicated by this icon. The  
vehicle position mark will move on the map in accordance with your vehicle's movement.  
POI icons (only available in Guidance Point map view) :  
8
Can be displayed if there are POI information in the current map.  
Arrow : Indicates the next guidance direction  
9
10  
Directional indicator : Displays the orientation of the map.  
Guidance point (intersection) enlarged map*1 :  
11  
When an optional GPS unit is connected, a magnified, first person view of the upcoming  
intersection will be shown upon approaching the next Guidance Point during route guidance.  
12  
Route map icon :  
This icon is always displayed on the Route map.  
Guidance list display : Shows a list of the upcoming Guidance Points and guidance directions  
(up to 3 Guidance Points from current position).  
13  
Manually selection icon*1*  
14  
Guidance information  
15  
Arrow  
16  
Distance remaining  
*1: Manually selection, Current position and Guidance point enlarged map can be displayed only when  
GPS unit is connected.  
*2: While this icon is displayed, the automatic map switching is not executed. For details, refer to the  
“Automatic map switching”.  
Town Map mode  
Displays the town map of a specied area. If an optional GPS unit is connected, your vehicle  
position is displayed, which can help you identify your current position.  
OVERALL VIEW : All over view of the area can be displayed.  
When GPS reception is available :  
Current position can be displayed.  
The user can zoom in on an area  
(indicated by the red rectangle) as  
shown in the CLOSE UP VIEW below.  
CLOSE UP VIEW : Gives the user a more detailed map for the selected area.  
The map is displayed with a scale indicator.  
Current Position*1  
Route Number  
1
2
3
4
5
6
Cursor : Specifies the display area of the CLOSE UP VIEW.  
Manually selection icon*1*2  
Scale indicator  
Street name  
*1: Current position and Manually selection can be displayed only when GPS unit is connected.  
*2: While this icon is visible, a map of your vehicle position can be displayed by the [RTN] button.  
How to display the Audio screen  
Press the [SCREEN] button to switch the screen display.  
1
ATTENTION  
When the display is set to Area shot screen, the buttons are assigned to Area shot functions. To  
operate the audio, switch the display to Audio screen.  
Route Assist Operation  
[CUSTOM/MENU] button :  
[SELECT] (Upper/Lower) button㧦  
Activates Menu Selection mode  
Jumps to next/previous Guidance Point.  
(press and hold for more than 1 second).  
[MODE] button :  
[MUTE/Area Shot] button :  
Turns the Area Shot function ON/OFF  
(press and hold for more than 1 second).  
Buttons [1] to [5]㧦  
Displays information for the corresponding POI.  
Button [6] :  
Hides the POI.  
[ENTER] button :  
Toggles between guidance map and list view.  
[RTN/BAND] button㧦  
Displays a map of the current position.  
Switches between the Route Assist mode  
and the Town map mode (press and hold for  
more than 1 second).  
[SELECT] (Right / Left) button㧦  
Changes the reduction scale of the map.  
[SCREEN/TEXT] button㧦  
When pressed normally, switches between  
Audio and Area Shot mode.  
When pressed and held for more than  
1 second, activates scrolling text information.  
Displaying Route Guidance Maps  
After passing each Guidance Point (intersection, etc) along the guidance route, user input is  
required to move to the next Guidance map. Previous Guidance maps can also be accessed  
manually. If an optional GPS unit is connected, the system can be set to automatically switch to  
the next map upon passing a given Guidance Point.  
Press the [SELECT] (Upper/Lower) button to jump to the next/previous Guidance  
map.  
1
Using this button the user can check both past/upcoming Guidance Point maps and route  
maps (depending on where current location is along a given route, some map data may not  
be available).  
Upon switching to the Guidance Point map scrolling text information will be shown.  
After the display has scrolled through all of the text information, the current Guidance Point  
street name and distance to the guidance point will be displayed as static non-scrolling text.  
Scrolling text information  
The user can manually recall previously displayed scrolling text information as follows.  
Press and hold the [SCREEN] button for more than one second.  
1
Previously shown scrolling Guidance information will be displayed.  
ATTENTION  
When the Scroll Pattern is set to “Repeat”, the information text will be scrolled repeatedly at a  
certain time (For details of the operation, see the Owner’s Manual).  
Displaying vicinity POI information  
POI locations and information can be displayed if POI data has been downloaded from the E-  
iSERV website along with map data. Up to 5 POIs can be displayed on the screen at once.  
Selecting POI category  
A single POI category, such as BANK or RESTAURANT, can be set to be display, when Area Shot  
mode is activated.  
Press and hold the [CUSTOM] button for more than one second.  
1
This activates the Menu Selection mode.  
Using the [SELECT] (Upper/Lower) buttons, find the “FUNC” item and press the  
[ENTER] button.  
2
This opens the Function Menu.  
Using the [SELECT] (Upper/Lower) buttons, find the “Area Shot” item and press the  
[ENTER] button.  
3
This accesses the Area Shot settings menu.  
Using the [SELECT] (Upper/Lower) buttons, find the “POI Select” item and press the  
[ENTER] button.  
4
This will open the POI selection screen.  
Usingthe[SELECT](Upper/Lower)buttons, cyclethroughtheavailablePOIcategories  
to find the category you wish to display.  
5
Once you have cycled to the desired POI category, press [CUSTOM] or [RTN] button to  
finalize your selection and press repeatedly until you fully exit Menu Selection mode.  
6
POI Category List  
No.  
POI  
No.  
10  
11  
POI  
EDUCATION  
FAST FOOD  
FERRY TERM.  
GAS STATIONS  
GOLF COURSE  
HOTEL  
No.  
19  
20  
21  
22  
23  
24  
25  
26  
27  
POI  
1
AIRPORT  
PARK  
2
ATM  
PARK & RIDE  
POLICE DEPT.  
REST AREA  
RESTAURANT  
SHOPPING  
3
AUTO CLUB  
BANK  
12  
13  
14  
15  
16  
17  
18  
4
5
CASINO  
6
CITY HALL  
CIVIC CENTER  
CONVENTION  
COURT HOUSE  
7
LIBRARY  
THEME PARK  
TRAVEL/TOUR  
WINERY  
8
MEDICAL  
9
MUSEUM  
ATTENTION  
The ‘POI Select’ is operable only when the Area Shot mode is activated and the Route Assist is  
selected.  
Displaying POI information  
Press the button [1] to [5] to display the corresponding POI information, when the  
POI icons are displayed on the map.  
1
The POI information displayed consists of :  
• Name/name of business  
Telephone number  
• ZIP code  
• Address  
When the page up/page down mark (  
/
) is displayed, press [SELECT] (Upper/Lower)  
button to switch to the previous/next page.  
Press the button [6] or the [RTN] button to return to the map screen.  
Guidance List screen  
In Guidance List view, the user can view a list of street names, guidance directions and distances  
to guidance point for the next 3 Guidance Points from current location.  
Using the following controls, the user can switch back and forth between map view and list view  
during route guidance.  
Press the [ENTER] button while Area Shot mode is activated.  
1
This switches the display from map view to list view.  
Press the [ENTER] button again to switch back to map display.  
ATTENTION  
• When using an optional GPS unit, and GPS reception fails (when entering a tunnel for example)  
during route guidance, the display will automatically switch from map view to list view. In this  
case, pressing the [ENTER] button will not switch the display back to map view until GPS  
reception has been restored.  
• When reception is restored, the display will automatically change from list view to map view.  
Cycling through Guidance Points  
Use the [SELECT] (Upper/Lower) buttons to cycle back and forth through all of the  
Guidance Points.  
1
Upper : Jumps to a later guidance point than that currently being displayed in the guidance  
list screen.  
Lower : Jumps to an earlier guidance point than that currently being displayed in the  
guidance list screen.  
NOTE : Depending on where current location is along a given route, some map data may  
not be available.  
Changing map scale  
Press the [SELECT] (Right / Left) button to change map scale.  
1
Right : To switch to a wider range map  
Left : To switch to a more detailed map  
Route Simulation function  
When the system has nished reading the Area Shot data and route simulation is set to ON, a  
series of maps is displayed from the starting point to the destination when Area Shot mode is  
selected. This allows you to conrm the route to your destination.  
While in Area Shot mode, press and hold the [CUSTOM] button for more than one  
second.  
1
This activates the Menu Selection mode.  
Using the [SELECT] (Upper/Lower) buttons, find the “FUNC” item and press the  
[ENTER] button.  
2
This opens the Function Menu.  
Using the [SELECT] (Upper/Lower) buttons, find the “Area Shot” item and press the  
[ENTER] button.  
3
This accesses the Area Shot settings menu.  
Using the [SELECT] (Upper/Lower) buttons, find the “Route Simluation” item and  
press the [ENTER] button.  
4
This accesses the Route Simulation setting menu.  
Use the [SELECT] (Upper/Lower) buttons to toggle the Route Simulation setting ON/  
OFF.  
5
Press the [CUSTOM] or [RTN] button to exit the Menu Selection mode.  
6
Once you have fully exited the Menu Selection screen, the Route Simulation will start and  
the “DEMO” icon will flicker.  
ATTENTION  
The ‘Route Simulation’ is operable only when the Area Shot mode is activated and the Route  
Assist is selected.  
GPS Functions (optional GPS unit required)  
The following functions become available in addition to the aforementioned standard functions  
when an optional GPS unit is connected :  
• Current position is displayed  
• Automatic map switching  
• Guidance tone  
Automatic volume adjustment (For details of the operation, see ‘AVL(Automatic Volume Levelizer)  
setting’ in the Owner’s Manual.)  
• Onscreen GPS information (For details of the operation, see ‘GPS information display’ in the  
Owner’s Manual.)  
Automatic map switching  
When an optional GPS unit is connected, your vehicle position will be displayed on the map.  
The map will automatically switch in accordance with your vehicle’s movement.  
Press the [RTN] button.  
1
When an area other than your vehicle position is displayed with the [SELECT] (Upper/  
Lower) button, the  
is displayed. Press this button to display the current position.  
ATTENTION  
• The map transition sequence in GPS Mode is as follows :  
Map displays starting position of route  
Current position mark moves outside the range of the displayed map.  
Display switches to Route map*  
The current position mark enters the range of the next Guidance Point map.  
Display switches to Guidance Point map  
Current position moves outside the range of the Guidance Point map.  
Display switches back to Route map*  
Display continues to alternate between Guidance Point route map  
and Guidance Point map view.*  
* The route map may not be displayed if the distance to the guidance point is too short.  
• When in automatic map switching mode, pressing the [SELECT] (Upper/Lower) button will  
display the next or previous map and pressing the [RTN] button will switch to a map of the  
current position.  
Guidance Tone  
The guidance tone will sound at certain times, such as when the map is switched or when entering  
the vicinity of a guidance point (within about a 0.2 mile radius), to inform you of the guidance  
point.  
ATTENTION  
• Two kinds of guidance tone are provided:  
• When the map is switched: A sound that inform you of switching the area  
• When entering the vicinity of a guidance point: A sound that inform you of entering the vicinity  
of a guidance point  
• The timing of the guidance tone may be inaccurate depending on the quality of GPS  
reception.  
Town Map Operation  
Using this function Town Map of a specified area can be displayed onscreen (data must be  
downloaded from the ECLIPSE E-iSERV web site prior to use).  
[CUSTOM/MENU] button :  
[MODE] button :  
Activates Menu Selection mode  
Switches between the Route Assist  
mode and the Town map mode  
(press and hold for more than 1 second).  
(press and hold for more than 1 second).  
[MUTE/Area Shot] button :  
Turns the Area Shot function ON/OFF  
(press and hold for more than 1 second).  
[SELECT] (Upper/Lower/Right/Left) button  
Jumps to the next map in the corresponding  
heading. Moves the map selection frame in  
the corresponding direction.  
[SCREEN/TEXT] button㧦  
Switches between Audio and Area Shot  
mode.  
[ENTER] button :  
Switches between OVERALL VIEW and  
CLOSE UP VIEW.  
[RTN/BAND] button㧦  
Displays a map of the current position.  
Displaying the Town Map  
If the Area Shot data (Route Assist le, Town Map le) downloaded from E-iSERV website is read  
into the main unit with a USB memory or CD-R, the map display can be changed into Town Map  
screen.  
Activate Area Shot mode by pressing and holding the [MUTE/Area Shot] button for  
more than 1 second.  
1
Press and hold the [MUTE/Area Shot] button for more than 1 second to switch from  
Route Assist to Town Map mode.  
2
Use the [SELECT] (Upper/Lower/Right/Left) button to move the map selection frame  
in Town Map overall view or to jump to the next map in the corresponding heading  
in close up view.  
3
Upper : Jumps to the next map screen to the North of the current map displayed.  
Lower : Jumps to the next map screen to the South of the current map displayed.  
Right : Jumps to the next map screen to the East of the current map displayed.  
Left : Jumps to the next map screen to the West of the current map displayed.  
In OVERALL VIEW the above controls move the map selection frame in the corresponding direction.  
Press the [ENTER] button to switch the Town Map View.  
4
In OVERALL VIEW mode, pressing the [ENTER] button will display a CLOSE UP VIEW  
map of the area specified by the map selection frame.  
Pressing [ENTER] in CLOSE UP VIEW will switch  
the display back to the OVERALL VIEW map.  
ATTENTION  
• When downloading the Town Map le, the reduction scale of the map can be selected at the  
server. The selectable scales are 1/20000, 1/40000 and 1/70000.  
• If attempting to jump to outside the area using the [SELECT] button, the operation will be  
invalid.  
Operations when an optional GPS unit is connected  
The following functions can be operated in addition to the standard functions when an optional  
GPS unit is connected :  
• Current position is displayed  
• Automatic map switching  
Automatic map switching  
Using your vehicle position information, the current location is displayed on the map. When the  
CLOSE UP VIEW is selected, the map automatically scrolls according to your vehicle position.  
Press the [RTN] button when the CLOSE UP View is selected.  
1
When the area where your vehicle position mark is not included is displayed with the  
[SELECT] (Upper/Lower/Right/Left) button, the  
icon is displayed.  
When the optional GPS unit is connected, if the display is switched to the Town Map screen,  
the map with a section including current position is displayed.  
When your vehicle moves, the displayed Town Map screen also scrolls.  
ATTENTION  
When the current position goes outside the area of Town Map, the vehicle position cannot be  
displayed.  
Motion Picture customization  
Importing display data  
About the Motion Picture Customize  
Load the Display data in the USB memory or CD-R, which is downloaded from the E-iSERV  
(web site), to the unit. For details of the operation, see ‘Importing display data (DISP Data)’ in the  
Owner’s Manual.  
Applications for creating Motion Picture, Wallpaper and Slide Show screens (Cutting Board) can  
be downloaded, allowing you to create your own original Motion Picture, Wallpaper and Slide  
Show screens.  
How to operate the Motion Picture Customize  
Download the Motion Picture and/or WallPaper from the E-iSERV website, then write  
them to USB memory or CD-R.  
1
ATTENTION  
<When using a USB memory drive>  
• Data downloaded from the ECLIPSE web site (E-iSERV) shoule be saved in folders on the USB  
memory as follows: (NOTE: in order for the system to properly recognize and load DISP data,  
the user must create and name their folders as shown in the diagram below).  
ECLIPSE  
Must be created by user  
DISP  
ZZZZZZZ.XXX  
File extension  
Motion Picture .eld  
Slide Show  
Wallpaper  
.esd  
.bmp  
You can create your own le by downloading the le creating tool. You can also download the  
ready-made les from the server.  
• In the USB music-playing mode, the E-iSERV data in the USB memory cannot be read.  
<When using a CD-R>  
• The main unit can only import les located in the root directory of the CD-R.  
ZZZZZZZ.XXX  
File extension  
Motion Picture .eld  
Slide Show  
Wallpaper  
.esd  
.bmp  
• Disc formats that may be used are as follows:  
• CD-ROM (MODE 1)  
• CD-ROM (MODE2_FORM 1)  
* NOTE: CD-ROMs written in MODE2_FORM2 cannot be read.  
• When data is imported from a CD-R, the importing process will take a long time if a lot of  
data other than the import data has also been saved to the CD-R.  
* The Motion Picture, Wallpaper and SlideShow created using the ”Cutting Board” can  
also be written to the USB memory or CD-R.  
Load the downloaded data from the USB memory or CD-R to the unit. For details of  
the operation, see 'Importing display data (DISP Data)' in the Owner's Manual.  
2
Steering Remote Control  
Importing steering remote data (U.S.A. only)  
About the Steering Route Control  
The vehicle’s factory loaded steering remote becomes inoperable when the CD5100 is installed.  
The ECLIPSE web site (E-iSERV) provides software that enables steering remote operation even  
with the installation of the main unit. Import this software into your CD5100.  
How to operate the Steering Remote Control  
Download the file for Steering Remote setting from the E-iSERV website, then write  
it to USB memory or CD-R.  
1
ATTENTION  
<When using a USB memory drive>  
• Data downloaded from the E-iSERV web site should be saved to folders created in the USB  
drive as shown below (NOTE: in order for the system to properly recognize and load steering  
remote data, the user must create and name their folders as shown in the diagram below).  
ECLIPSE  
User creation  
DATA  
Automatic creation  
File extension  
XXXXXXX.ssw  
Files retrieved from the E-iSERV web site are given automatically generated lenames upon download.  
• In the USB music-playing mode, the E-iSERV data in the USB memory cannot be read.  
<When using a CD-R>  
• The main unit can only import les located in the root directory of the CD-R.  
Automatic creation  
File extension  
XXXXXXX.ssw  
• Disc formats that may be used are as follows:  
• CD-ROM (MODE 1)  
• CD-ROM (MODE2_FORM 1)  
* CD-ROMs written in MODE2_FORM2 cannot be read.  
• The loading process may take for a certain time if the CD-R contains unrelated data in  
addition to the steering remote customization les to be imported.  
Load the downloaded data from the USB memory or CD-R to the unit. For details  
of the operation, see ' Reading steering remote data (U.S.A. only) ' in the Owner's  
Manual.  
2
ATTENTION  
• This function is available only for the vehicles that have steering remote with the voltage  
detection type interface.  
• For detail of the setting, please contact to ECLIPSE dealer.  

Archos AV300 Series User Manual
Boston Acoustics GTA 400M User Manual
Burley AJ 3140 User Manual
Casio Scientific Calculator FX 85B User Manual
Clarion TTX7601 User Manual
Elinchrom 6000 User Manual
Hitachi DZMV270A User Manual
HP (Hewlett Packard) Hewlett Packard Car Video System 82912A User Manual
JBL GT1500d User Manual
JVC Camcorder KY F550 User Manual