BlueTrek Bluetooth Headset EN300 328 02 User Manual

BEFORE USING YOUR HEADSET FOR THE FIRST TIME  
BLUETREK G2 user guide  
Thank you for choosing the BLUETREK® G2, we hope you will enjoy the convenience  
we are bringing to you. The BLUETREK® G2 offers many functions, please read this  
manual before getting started.  
-
You must charge it continuously for about 8 hours, until the red indicator light  
turns off. Please refer to the “Charging the BLUETREK® G2” section of this  
manual.  
-
Pair the headset with a mobile phone. Please refer to the “Pairing BLUETREK®  
G2” section of this manual.  
EC-Declaration of Conformity  
We, Innovi Technologies Ltd of  
31/F China Online Centre,  
333 Lockhart Road,  
Introduction  
The BLUETREK® G2 headset is a wireless headset based on the Bluetooth®  
technology. It complies with Bluetooth® 1.2 protocol, supporting Headset and Hands-  
free profile.  
Wan Chai, Hong Kong  
declare under our sole responsibility that our product  
BLUETREK G2  
The BLUETREK® G2 headset has 3 buttons:  
“TALK “button (main button),  
1 “VOL+ “button,  
1 “VOL- “button.  
to which this declaration refers is in conformity with the appropriate standards  
EN300 328-02  
EN301 489-17  
EN301 489-01  
EN50371  
Microphone  
VOL - button  
Talk button  
Indicator light  
VOL + button  
EN60950  
Following the provisions of Radio and Telecommunications Terminal Equipment  
directive 1999/5/EC.  
Charging  
socket  
Speaker  
November 2005  
Guillaume Ponticelli, Director of Development  
FCC Statement  
This device complies with Part 15 of the FCC rules. Operation is subject to the following  
two conditions: (1) This device may not cause harmful interference. (2) This device must  
accept any interference received, including interference that may cause undesired  
operation.  
Caution: Changes or modifications to this Bluetooth® headset not expressly approved  
by the party responsible for compliance could void the user’s authority to operate it.  
Industry Canada notice to users and product statements  
To prevent radio interference with the licensed service, this device is intended for  
operated indoors and away from windows to provide maximum shielding. Equipment (or  
its transmit antenna) that is installed outdoors is subject to licensing.  
In compliance with Industry Canada regulations, technical specifications have been  
provided in a declaration of conformity. This does not imply that Industry Canada  
approved the equipment.  
Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer under license.  
PAGE 1 / 6  
PAGE 2 / 6  
 
Adjusting the volume  
Troubleshooting guide  
The first thing you should do when encountering a problem that you cannot solve with  
this manual, is to switch off your headset and your mobile phone, and switch them on  
again.  
To increase the volume during an active call, press the “VOL+” button on the headset.  
To decrease the volume during an active call, press the “VOL-“ button on the headset.  
To find out more, please refer to the trouble shooting frequent asked questions in our  
website: www.bluetrek.com.  
Muting the microphone  
Guidelines for safe use  
Read those guidelines before using your headset.  
To mute the microphone during an active call  
During an active call, press and hold the VOL+ button for approximately 2 seconds. A  
periodic tone can be heard in the speaker when the microphone is muted.  
-
-
-
Do not drop or try to alter the shape of your Headset.  
Do not expose your headset to liquid or moisture.  
Do not expose your headset to extreme temperatures. Temperature range: 0-  
40C.  
To end the mute function  
When the microphone is muted quickly press the VOL+ button on the BLUETREK® G2.  
The periodic tone will end.  
-
-
Do not expose your headset to fire or open flames.  
Do not try to disassemble your headset. Service and Maintenance can only be  
performed by authorized BLUETREKdealers.  
Keep your headset away from dust and dirt.  
Do not let children play with your headset, since it contains small parts that could  
become detached and create a choking hazard.  
Check the regulation in your area if you plan to use your headset while driving.  
Turn off your headset before boarding an airplane.  
Transferring a call from BLUETREK® G2 to the mobile phone  
-
-
During an active call, press the TALK button for about 2 seconds.  
(This function only works in the Hands-Free Profile.)  
-
-
In the Headset profile, you can simply turn off your headset.  
CAUTION : Danger of explosion if battery is incorrectly replaced. Dispose of batteries  
according to local regulations. Do not dispose as household waste.  
Transferring a call from the mobile phone to the BLUETREK® G2  
To transfer the call back to the headset, use the menu option on your phone.  
Call waiting  
When you hear a call waiting alert while you are on a call, press once on the TALK  
button to accept the second call.  
This function may not be available, depending on your phone’s functionality. However,  
you can always answer the second call from your phone keypad.  
Additional features with some phones  
Rejecting a call  
When the headset rings, press the TALK button for about 2 seconds.  
Redial the last number  
When there is no incoming or active call, press the TALK button for about 2 seconds  
until you hear a beep.  
PAGE 5 / 6  
PAGE 6 / 6  
 

Billy Goat Vacuum Cleaner HTR1803VEU User Manual
Binatone Telephone Twin XD1220 User Manual
Black Box Switch ServSwitch Secure Plus with USB User Manual
Black Decker Cordless Drill 9034 User Manual
Boss Audio Systems Car Stereo System BV9967BI User Manual
Bowflex Fitness Equipment Dumbbell User Manual
Briggs Stratton Portable Generator 1679 0 User Manual
Califone Headphones 2810 PA User Manual
Carrier Portable Generator ASPBA1CCA016 User Manual
Casio Projector XJ 460 User Manual